Hello, i have an audio installation using Qsys Cores with Qlan and Dante software with a primary and backup audio network in redundancy. there is only audio in that network So my prim...
A query around using Engage to configure an sACN system for an ETC Eos family control setup. I have previously manually configured a Lighting VLAN using various M4250 range products an...
Products: M4250-40G8XF and M4350-24F4V (current firmware for each, 13.0.4.26 and 14.0.2.23) There are significant discrepancies between the AV Profiles in the two series of devices and I am not cer...
This should be straight forward however i'm facing an issue setting up AV solution for a client with stand alone M4250-40G switch and 30 NVX Tx and 5 NVX Rx. Using the AV UI i selected the Video with...
Is there a way to automatically have a scheduled task in the switch to create a backup image of the running configuration? Have the option to choose how often the backup occurs using Engage software ...
Firmware Version 13.0.4.23 AV UI Version 2.2.7.36 Boot Version 1.0.0.12 Hello, everywhere I check the specs for this switch, it indicates that the 4 fiber ports are ...
When archiving the switch configuration for future maintenance referral, if I take a backup from the AVUI it creates a "startup-config.cfg" file that includes the text configuration AND the html for ...
Hello Community, I have a Netgear PR460X router with 3 M4250-26G4F-PoE+ daisy chained on 10gSFP. I have 5 VLANs : 1(MGMT and device traffic), 20(testing(, 25(Guest Network), 100(SIP ...
Hi. Just picked up a M4250-10G2XF-POE++ It came with firmware 13.0.4.8 and I figured I should throw in the latest firmware (13.0.4.18). It updated just fine, but now the fan speed is pinned ...
Greetings! I was told by the network security guy saying that my M4250 switch has a vulnerability on TCP Port 4444, I found out it is using on the web based terminal window on the admin gui....
