Search the Community
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
100,000 results
Sorted by:
‎2023-11-22
05:13 AM
After the latest updates with chrome, The certificate is not secure and I get this: This site can’t be reached The webpage at https://192.168.x.x/ might be temporarily down or it ...
Show results in replies (9)
-
Here is the solution I found: We found a fix. Delete the user's local state file located i...
-
Hi @James_MA, Try using Firefox to update Firmware (Online update) and a factory reset i...
-
@James_MA wrote: chrome --force-fieldtrials=RSAKeyUsageForLocalAnchors/DisabledLaunch ...
-
Not a refernence, however using the ubiqutous Chrome Version 121.0.6167.161 (Offizieller Build...
-
Will Netgear ever fix that sill certificate error?
-
OS: Windows 11 Pro 23H2 Browser: Chrome Version 121.0.6167.161 (Official Build) (64-bi...
-
So navigating to HKEY_LOCAL_MACHINE\SOFTWARE\Policies in regedit and there is no Google folder...
-
I tried the registry flag you mentioned for Edge (not Chrome), and while it works (I'll tell you ho...
-
I posted a reply earlier but for some reason it didn't show up, apologies if this winds up being a ...
I am receiving a notification message that reads, "Guest Wifi Test deep link". Does anyone know what this means?
Show results in replies (9)
-
https://status.netgear.com/orbi 7th July 2023 Multiple Push Notifications...
-
Today I received multiple notifications on my phone as shown here. Any idea what is going on? Click...
-
Same here. Just started receiving multiple "Guest WiFi Test deep link" notifications. Unable to loc...
-
Where are you seeing this? Post a screen capture? What NG product are you using?
-
Same here…anyone have any idea what’s causing it?
-
Seeing this too, same behavior.
-
Came here to find an answer to the same question
-
Hi. I've used the RBR50 for several years now - works great. But today, for the first t...
-
Me too. started about 15 minutes ago. I've gotten about 6 of these on the app on my pho...
‎2024-02-07
04:13 PM
10 Kudos
I just manually updated to firmware version v1.1.4.28 on my Netgear RAX 43v2 router. After the update I can access my router through the Netgear app but am unable to get to the UI through the i...
Show results in replies (9)
-
No, only answer seems to be do a factory reset. Seems to be a firmware issue since across multiple ...
-
Used correct IP address shown in app and it takes me to the page with the error message
-
It is the default IP address for Netgear devices showing up on App
-
Used correct IP shown in app. It is the default IP for Netgear
-
Any HELP on this?
-
Maybe make a new back up now?
-
Well today I had the day off with nothing to do, so I figured I'd waste a couple hours of my life a...
-
Well ill be damned. Did the factory reset and setup from scratch and now it works. What good is a b...
-
FYI: https://community.netgear.com/t5/Nighthawk-with-WiFi-6-AX-and/New-RAX41-42-43-50-54-V2-Firmw...
‎2023-09-08
08:21 AM
3 Kudos
New Features: 09/08/2023
Supports Separate SSID IoT network.
https://kb.netgear.com/000064267/How-do-I-enable-or-disable-the-Internet-of-things-IoT-network-on-my-Orbi-WiFi-6E-System
ht...
Show results in replies (8)
-
Followed the directions and upgraded. Did the RBS750 units first and then the RBR750. &...
-
Yes. Since we cant set static addressing on the RBS themselves.
-
Updated following instructions per letter. 3 satellites updated and working fine with RBR on previo...
-
I had not experienced random LEDs on my 7 series on v4 FW versions. Nobody mentioned in in ...
-
Further to my previous post. I have just done a full factory reset on bith devices and still the m...
-
User had been asking about SSID separation with Orbi for years due to the bad IoT design on the Mfr...
-
Be 100% certain you are using the correct file for your Satellites. The file should have a this nam...
-
That’s a pretty decent jump from V4.6.14.3. Not showing up on my admin page yet, but that is a g...
‎2023-09-08
08:21 AM
3 Kudos
New Features: 09/08/2023
Supports Separate SSID IoT network.
https://kb.netgear.com/000064267/How-do-I-enable-or-disable-the-Internet-of-things-IoT-network-on-my-Orbi-WiFi-6E-System htt...
Show results in replies (8)
-
Update went smooth, no issues so far.
-
And those IoT devices are configured to access 2.4 GHz SSID named "KUBA" same as 5 GHz
-
Good to hear. Be sure to save off a back up configuration to file for safe keeping. Saves time if a...
-
Update went smooth, I’m using only Rbr850. Despite I had only thin brick walls my iPad was constan...
-
Update went smooth but after 2 days had to shut down satellite because it won't let clients get an ...
-
Has a power off for 1 minute then back ON with the ISP modem and router been performed since last u...
-
Updated both satellites (RBS850) and the Router (RBR850).... everything went really smooth (backed ...
-
I recently had an issue where my RBS850 satellite didn't seem to have any devices connected to it. ...
‎2023-08-19
02:48 AM
My router is randomly and intermittently turning off it's wired and WiFi connections, which means every device connected loses it's connection. It occurred several times yesterday and sometimes occu...
Show results in replies (9)
-
The modem is a tp link TD-W9970 in bridge mode, but it has been 100% stable since I setup the ...
-
@cuke2u wrote: I thought I'd found some settings that would work, as posted in the...
-
Well I had another random router reboot yesterday afternoon after setting ipv6 to auto so I've disa...
-
@cuke2u wrote: My router is randomly and intermittently turning off it's wired and WiFi con...
-
Beyond, a not so fun fact is that the RAX70 WAN port does run on Fast Ethernet (100 Mb/s) - in the ...
-
@cuke2u wrote: Well I had another random router reboot yesterday afternoon after setting ip...
-
Indeed it does so I'll set it to that and give it a whirl, not sure though if the RAX70 supports th...
-
Thanks, the router has firmware version 1.0.14.134 and it's connected to a modem, however that show...
-
@cuke2u wrote: Indeed it does so I'll set it to that and give it a whirl, not sure though i...
‎2023-11-06
05:54 PM
Hello, Recently we were told by our ISP (Spectrum) that our Internet speed has increased from 100MB to 300MB. Not only did this not happen, but our upload speeds are now nonexistent when connected v...
Show results in replies (9)
-
Thanks FurryE38. Well I have an update! Spectrum came out and replaced the line due to errors they...
-
Thanks Furry 38. I do not have the Killer Ethernet Card. Only have the Netgear AC1900 C...
-
Tim and Marilyn: What is the "single switch in my control panel to fix slow speeds for a NetG...
-
Hi swingtime! It is the "Prioritization Engine" - literally just turn it off and the issue is resol...
-
Glad ISP helped on there side. Ya Killer adapters have been historically one cause of po...
-
Let us know how it goes.
-
Well...the plot thickens. I talked to a Spectrum tech a few weeks ago who insisted they were pushi...
-
What Firmware version is currently loaded? Please post a copy and paste of the modems connection s...
-
Thanks again Furrye38, and thanks again for this (and the earlier) helpful links!
‎2024-02-26
09:07 AM
2 Kudos
Hi I currently have a ReadyNAS 214 device which after updating to firmware version 6.10.10, no longer allows me to install or update apps via the admin page as Netgear have now disable...
Show results in replies (8)
-
@Rickjones80 wrote: I currently have a ReadyNAS 214 device which after updating to...
-
Thank you StevenB. I've only ever updated the firmware by simply clicking ok. I didn't ...
-
I'm SO glad I didn't just auto-update. I saw the mention of the "Apps" change in the release notes ...
-
@XrayDoc88 wrote: 1. Did firmware 6.10.9 even apply to the RN628X? My NAS we...
-
@StephenB wrote: In my case, the metadata libraries are on the PC, and the transcoding...
-
I just had this same issue after an auto update. I only run PLEX app and when the new update came o...
-
So all you did was downgrade the firmware and you were able to upload the new ReadyNAS PLEX server?...
-
Then that means Plex doesn't need any new or updated standard packages. Not surprising if it ...
‎2023-12-05
06:41 AM
Bug Fixes: 11/21/2023
Fixes the issue where default time zone is in wrong setting when internet access is not available.
Fixes the issue where offline client devices will show on current c...
Show results in replies (8)
-
Known Issues: For users seeing a Access Denied message after the FW is loaded and processed by th...
-
I updated the firmware today (10Feb24) and I can no longer log into the router from any of my compu...
-
I found if you disconnect the modem you can login with no internet connection. Then sim...
-
@1modulator wrote: I found if you disconnect the modem you can login with no in...
-
You shoulsd be on the new firmware since it resolves security issues. What worked for me was ...
-
For users seeing a Access Denied message after the FW is loaded and processed by the router, users ...
-
Thanks for the information, as soon as I can do what is indicated to update it to the latest versio...
-
Added to the initial post. Thank you.
‎2023-10-09
05:57 AM
As the title states, my router is constantly crashing. First the GUI fails and then shortly there after, the whole of the router fails. I have to manually restart the router for it ...
Show results in replies (9)
-
Probably best to return it. Good Luck.
-
I have my router sitting on large wire mesh shelving, so it has full open air. I wonder if I ...
-
https://www.amazon.com/NETGEAR-Nighthawk-Smart-Wi-Fi-Router/dp/B00KWHMR6G - This router is what I w...
-
I ended up buying a ASUS ROG Rapture GT-AX6000, I have had good product support from them in the pa...
-
That was a good modem too when it was supported by my ISP. It got booted though. Y...
-
Is this common a common problem for this router or this vendor? I have seen that other router...
-
What are your thoughts on this? Hardware failure?
-
No. Maybe a Mfrg defect or part that went bad. Not all routers are bad. Just maybe one bad go thru ...
-
The 6183 is only D3.0, not 3.1. I doubt this is causing the problem though. Would need to test anot...