Search the Community
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
100,000 results
Sorted by:
2023-11-22
05:13 AM
After the latest updates with chrome, The certificate is not secure and I get this: This site can’t be reached The webpage at https://192.168.x.x/ might be temporarily down or it ...
Show results in replies (8)
-
Here is the solution I found: We found a fix. Delete the user's local state file located i...
-
Have same problem on Mac OS 14.3.1 (23D60) latest Chrome Chrome is up to date Versio...
-
@schumaku wrote: The --force.... is a parameter to be passed to Chromw on start-up from the...
-
Heya @CrimpOn Looks like you are mixing several different issues and models. ...
-
Perhaps I am not doing it correctly. Windows 11 Pro. trying to open https://orbilogin.net or ...
-
chrome --force-fieldtrials=RSAKeyUsageForLocalAnchors/DisabledLaunch does not work in my pc, ...
-
Hi @James_MA, Try using Firefox to update Firmware (Online update) and a factory reset i...
-
OS: Windows 11 Pro 23H2 Browser: Chrome Version 121.0.6167.161 (Official Build) (64-bi...
2023-07-07
09:55 AM
22 Kudos
I am receiving a notification message that reads, "Guest Wifi Test deep link". Does anyone know what this means?
Show results in replies (9)
-
https://status.netgear.com/orbi 7th July 2023 Multiple Push Notifications...
-
I have the same exact notification--multiples of it. Would love to know what's up.
-
Hundreds of people are getting this Guest wifi Test Deep Link notification. What the heck is going ...
-
My guess is someone on their Orbi app team is testing in production and they don't know it.  ...
-
I’m also experiencing this, at what would appear to be the exact same time you are. I was a bit ...
-
I'm getting these messages popping up on my iPhone. Anyone know why these started to appear? I wasn...
-
I’m getting this as well despite my Guest network being deactivated…
-
Today I received multiple notifications on my phone as shown here. Any idea what is going on? Click...
-
Same here. Just started receiving multiple "Guest WiFi Test deep link" notifications. Unable to loc...
2023-09-08
08:21 AM
3 Kudos
New Features: 09/08/2023
Supports Separate SSID IoT network.
https://kb.netgear.com/000064267/How-do-I-enable-or-disable-the-Internet-of-things-IoT-network-on-my-Orbi-WiFi-6E-System
ht...
Show results in replies (9)
-
Followed the directions and upgraded. Did the RBS750 units first and then the RBR750. &...
-
IoT addresses a long-standing customer issue: the ability to create a WiFi SSID that broadcasts onl...
-
What is Improves the stability of connections between router and satellites? Did the backhaul conne...
-
Want to update to 7.2.6.21 but have a few questions: 1) Does this firmware update solve th...
-
Yes. Since we cant set static addressing on the RBS themselves.
-
@FURRYe38 wrote: Why it was in beta since January. Because I have had to use all s...
-
Having real problems, I cannot updare the Firmware on Satellite at all. Just wont accept the file, ...
-
I had not experienced random LEDs on my 7 series on v4 FW versions. Nobody mentioned in in ...
-
There are ways to handle that. This just seems like a quick and dirty way to be able to have a netw...
2023-11-28
02:45 AM
I have just got Starlink and can connect wirelessly to it fine. I can put it in bypass mode, plug a 2m ethernet cable into the adaptor and connect this to my Netgear 4 - Stream AX1800 WiFi 6 Router, ...
Show results in replies (7)
-
SOLVED! I put a switch in between the Starlink ethernet adapter and the cat cable which runs up to ...
-
Sorry, I can confirm, the cable is cat5e
-
Some say there is a ethernet adapter that comes from the ISP that maybe needed and or use of a non ...
-
@J27 wrote: Someone elsewhere suggested it could be an IP issue, but I’m not sure? Thanks ...
-
@J27 wrote: I have just got Starlink and can connect wirelessly to it fine. I can put it in b...
-
Thanks for your quick reply. Re your first question, the “it” in bypass mode is the Starlink rou...
-
@J27 wrote: Re your 2nd question, the adapter is the Starlink ethernet adapter you can purc...
2024-02-07
04:13 PM
10 Kudos
I just manually updated to firmware version v1.1.4.28 on my Netgear RAX 43v2 router. After the update I can access my router through the Netgear app but am unable to get to the UI through the i...
Show results in replies (9)
-
No, only answer seems to be do a factory reset. Seems to be a firmware issue since across multiple ...
-
Used correct IP address shown in app and it takes me to the page with the error message
-
It is the default IP address for Netgear devices showing up on App
-
Used correct IP shown in app. It is the default IP for Netgear
-
Well ill be damned. Did the factory reset and setup from scratch and now it works. What good is a b...
-
Well today I had the day off with nothing to do, so I figured I'd waste a couple hours of my life a...
-
Any HELP on this?
-
Maybe make a new back up now?
-
FYI: https://community.netgear.com/t5/Nighthawk-with-WiFi-6-AX-and/New-RAX41-42-43-50-54-V2-Firmw...
2023-09-08
08:21 AM
3 Kudos
New Features: 09/08/2023
Supports Separate SSID IoT network.
https://kb.netgear.com/000064267/How-do-I-enable-or-disable-the-Internet-of-things-IoT-network-on-my-Orbi-WiFi-6E-System htt...
Show results in replies (9)
-
Update went smooth, no issues so far.
-
Hi, The update went without problems and everything seems to work. I'm having a curious ...
-
Lets try this, FR the RBS then turn it OFF. Use the RBRs web page and go into Basic tab/Con...
-
I updated my RBK853 to the 7.2.6.21 firmware manually. Updated from 4.6.14.3. Update went smoothly,...
-
All good so far. No issues at all with the upgrade. I'm glad Netgear decided to take this ...
-
Sometimes a soft reboot doesn't work well or is not enough. Powering OFF the RBR for 1 minute then ...
-
Amen. @Validus wrote: That hidden Wifi network it's picked up is likely actually ...
-
Does someone have a clue where the satellite get's the 2.4 SSID name? Devices are reco...
-
That screen shot clearly shows the IoT network enabled on 2.4G and 5G.
2023-11-06
05:54 PM
Hello, Recently we were told by our ISP (Spectrum) that our Internet speed has increased from 100MB to 300MB. Not only did this not happen, but our upload speeds are now nonexistent when connected v...
Show results in replies (8)
-
Thanks FurryE38. Well I have an update! Spectrum came out and replaced the line due to errors they...
-
What "single switch in the control panel did you punch? Thx. "There's literally a si...
-
Hi swingtime! I actually answered your question- see the reply right above your most recent post.
-
I do not see a "Prioritization Engine" switch of any sort on my netgear http://192.168.0.1/&nb...
-
I believe this "Prioritization Engine" feature is located on the Killer adapter cards control ...
-
👍🍻
-
Thanks FURRYe38. I hope we don't have to replace it - that would be immensely frustrating as the wh...
-
I highly recommend next time, of you do have to get something different, go with separate modem and...
2023-08-19
02:48 AM
My router is randomly and intermittently turning off it's wired and WiFi connections, which means every device connected loses it's connection. It occurred several times yesterday and sometimes occu...
Show results in replies (8)
-
The modem is a tp link TD-W9970 in bridge mode, but it has been 100% stable since I setup the ...
-
I guess I thought that as the SkyQ hub supports ipv6 then I should try to turn it on with the RAX70...
-
@cuke2u wrote: I guess I thought that as the SkyQ hub supports ipv6 then I should try to tu...
-
As I have SkyQ and Sky broadband then they supplied the hub but I decided to replace the hub as I h...
-
@schumaku wrote: Beyond, a not so fun fact is that the RAX70 WAN port does run on Fast Ethe...
-
@cuke2u wrote: Thanks, the router has firmware version 1.0.14.134 and it's connected to a mo...
-
@cuke2u wrote: As I have SkyQ and Sky broadband then they supplied the hub but I decided to...
-
@cuke2u wrote: The modem is a tp link TD-W9970 in bridge mode, but it has been 100% sta...
2023-09-26
10:05 AM
Hi; I have the R8000P (AC4000) and about two weeks ago noticed my WiFI speed dropped precipitously from between 300-400Mbps to about 150Mbps. I am on a fiber gigabit plan through my ISP provider.&nbs...
Show results in replies (9)
-
Yes, or 192.168.1.1 or the routers IP address you may have configured on it. There is a FW update s...
-
@DesertRat66 wrote: 2) I got into my ISP modem router settings and disabled the WiFi hoping t...
-
Thanks again; to answer your question, yes, I have performed the steps you describe here - powering...
-
@DesertRat66 wrote: Performed the same speed test on multiple devices and consistently pulled...
-
Thanks, and yes, I understand that. If you notice in my post I tried to point out that prior to the...
-
@DesertRat66 wrote: I have the Zyxel 3000z modem. If simple enough for a l...
-
I don’t know the answer to your question but tend to believe it’s a requirement of the ISP provider...
-
Thanks but I think I’ve identified the bottleneck. It is FOR SURE a problem with the Netgear firmwa...
-
Fair enough; but to be clear it is the AV installer who, based on his first hand experience with re...
2024-02-26
09:07 AM
2 Kudos
Hi I currently have a ReadyNAS 214 device which after updating to firmware version 6.10.10, no longer allows me to install or update apps via the admin page as Netgear have now disable...
Show results in replies (9)
-
@Rickjones80 wrote: I currently have a ReadyNAS 214 device which after updating to...
-
Netgear has clearly already left the NAS market. Given that the Linux version on which the OS...
-
I can't believe this firmware update change! I have invested in two Netgear RN628X NAS device...
-
I'm SO glad I didn't just auto-update. I saw the mention of the "Apps" change in the release notes ...
-
@XrayDoc88 wrote: How can you even downgrade now that the upload option is gone? ...
-
Thank you, I have kept a copy of the Plex deb file and I have now amended my apt sources list which...
-
@XrayDoc88 wrote: 1. I thought the PLEX metadata libraries were stored and a...
-
Thank you StevenB. I've only ever updated the firmware by simply clicking ok. I didn't ...
-
Great information StevenB. Thanks for your help. I hope you can bear with me a little b...