Search the Community
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
100,000 results
Sorted by:
2023-11-22
05:13 AM
After the latest updates with chrome, The certificate is not secure and I get this: This site can’t be reached The webpage at https://192.168.x.x/ might be temporarily down or it ...
Show results in replies (8)
-
Here is the solution I found: We found a fix. Delete the user's local state file located i...
-
Have same problem on Mac OS 14.3.1 (23D60) latest Chrome Chrome is up to date Versio...
-
chrome --force-fieldtrials=RSAKeyUsageForLocalAnchors/DisabledLaunch does not work in my pc, ...
-
Perhaps I am not doing it correctly. Windows 11 Pro. trying to open https://orbilogin.net or ...
-
@schumaku wrote: The --force.... is a parameter to be passed to Chromw on start-up from the...
-
Heya @CrimpOn Looks like you are mixing several different issues and models. ...
-
Hi @James_MA, Try using Firefox to update Firmware (Online update) and a factory reset i...
-
@James_MA wrote: chrome --force-fieldtrials=RSAKeyUsageForLocalAnchors/DisabledLaunch ...
2023-11-28
02:45 AM
I have just got Starlink and can connect wirelessly to it fine. I can put it in bypass mode, plug a 2m ethernet cable into the adaptor and connect this to my Netgear 4 - Stream AX1800 WiFi 6 Router, ...
Show results in replies (7)
-
SOLVED! I put a switch in between the Starlink ethernet adapter and the cat cable which runs up to ...
-
Some say there is a ethernet adapter that comes from the ISP that maybe needed and or use of a non ...
-
Sorry, I can confirm, the cable is cat5e
-
@J27 wrote: Someone elsewhere suggested it could be an IP issue, but I’m not sure? Thanks ...
-
Thanks for your quick reply. Re your first question, the “it” in bypass mode is the Starlink rou...
-
@J27 wrote: How do you access the web browser GUI? And what’s the process? Use a ...
-
@J27 wrote: Re your 2nd question, the adapter is the Starlink ethernet adapter you can purc...
2023-09-08
08:21 AM
3 Kudos
New Features: 09/08/2023
Supports Separate SSID IoT network.
https://kb.netgear.com/000064267/How-do-I-enable-or-disable-the-Internet-of-things-IoT-network-on-my-Orbi-WiFi-6E-System
ht...
Show results in replies (9)
-
Followed the directions and upgraded. Did the RBS750 units first and then the RBR750. &...
-
What is Supports IoT network? Is this a new feature or capability? How does it work? Would I need t...
-
What is Improves the stability of connections between router and satellites? Did the backhaul conne...
-
IoT addresses a long-standing customer issue: the ability to create a WiFi SSID that broadcasts onl...
-
There are ways to handle that. This just seems like a quick and dirty way to be able to have a netw...
-
Updated to 7.2.6.21 , from 4.6.14.3 , went fine on my end. Updated satellite first then router. Did...
-
If you do happen to experience a problem, power OFF the system for 1 minute then back ON. It would ...
-
Want to update to 7.2.6.21 but have a few questions: 1) Does this firmware update solve th...
-
Watching this thread for updates on performance before I upgrade.
2023-11-06
05:54 PM
Hello, Recently we were told by our ISP (Spectrum) that our Internet speed has increased from 100MB to 300MB. Not only did this not happen, but our upload speeds are now nonexistent when connected v...
Show results in replies (8)
-
Thanks FurryE38. Well I have an update! Spectrum came out and replaced the line due to errors they...
-
Hi swingtime! I actually answered your question- see the reply right above your most recent post.
-
What "single switch in the control panel did you punch? Thx. "There's literally a si...
-
I do not see a "Prioritization Engine" switch of any sort on my netgear http://192.168.0.1/&nb...
-
I believe this "Prioritization Engine" feature is located on the Killer adapter cards control ...
-
👍🍻
-
Thanks FURRYe38. I hope we don't have to replace it - that would be immensely frustrating as the wh...
-
I highly recommend next time, of you do have to get something different, go with separate modem and...
2023-09-08
08:21 AM
3 Kudos
New Features: 09/08/2023
Supports Separate SSID IoT network.
https://kb.netgear.com/000064267/How-do-I-enable-or-disable-the-Internet-of-things-IoT-network-on-my-Orbi-WiFi-6E-System htt...
Show results in replies (9)
-
Update went smooth, no issues so far.
-
I updated my RBK853 to the 7.2.6.21 firmware manually. Updated from 4.6.14.3. Update went smoothly,...
-
Does someone have a clue where the satellite get's the 2.4 SSID name? Devices are reco...
-
That screen shot clearly shows the IoT network enabled on 2.4G and 5G.
-
Try changing the SSID name of the IoT network to RBK850-IoT Has a power off for 1 minute...
-
Totally "MY BAD". Yes, the IoT network shows as disabled
-
RBR850 / RBS850 Firmware Version 7.2.6.21 has been released, Finally, the following two features a...
-
All good so far. No issues at all with the upgrade. I'm glad Netgear decided to take this ...
-
Is there a documentation what this exactly means: Supports IoT network. Is it "only" cr...
2023-08-19
02:48 AM
My router is randomly and intermittently turning off it's wired and WiFi connections, which means every device connected loses it's connection. It occurred several times yesterday and sometimes occu...
Show results in replies (8)
-
The modem is a tp link TD-W9970 in bridge mode, but it has been 100% stable since I setup the ...
-
As I have SkyQ and Sky broadband then they supplied the hub but I decided to replace the hub as I h...
-
@cuke2u wrote: As I have SkyQ and Sky broadband then they supplied the hub but I decided to...
-
I guess I thought that as the SkyQ hub supports ipv6 then I should try to turn it on with the RAX70...
-
@cuke2u wrote: I guess I thought that as the SkyQ hub supports ipv6 then I should try to tu...
-
@cuke2u wrote: The modem is a tp link TD-W9970 in bridge mode, but it has been 100% sta...
-
@Kitsap wrote: @cuke2u wrote: The modem is a tp link TD-W9970 in bridge mode...
-
I was able to witness more what is occurring as the network cable disconnected came up on my tv thi...
2023-07-07
09:55 AM
22 Kudos
I am receiving a notification message that reads, "Guest Wifi Test deep link". Does anyone know what this means?
Show results in replies (9)
-
https://status.netgear.com/orbi 7th July 2023 Multiple Push Notifications...
-
Today I received multiple notifications on my phone as shown here. Any idea what is going on? Click...
-
Same here…anyone have any idea what’s causing it?
-
Where are you seeing this? Post a screen capture? What NG product are you using?
-
Same here. Five alerts today all the same. Never happened before.
-
I have the same exact notification--multiples of it. Would love to know what's up.
-
I’m also experiencing this, at what would appear to be the exact same time you are. I was a bit ...
-
Same here. Just started receiving multiple "Guest WiFi Test deep link" notifications. Unable to loc...
-
Seeing this too, same behavior.
2023-08-11
10:34 AM
Hi I have a P8000 and I’m trying to turn on IPv6 to run an Xbox series x. Is there a way to turn this on? The version I have is V1.4.4.94. My ISP is Hotwire communications. I have very little technic...
Show results in replies (8)
-
Tech was here made a bunch of calls and determined IPV6 isn’t available yet. “It’s something we’re ...
-
@LeadPipe wrote: Hi I have a P8000 and I’m trying to turn on IPv6 to run an Xbox series x. I...
-
@Kitsap is spot on with the general advice, but be warned that IPv6 comes in various flavours and n...
-
@LeadPipe wrote: I have a call into my ISP the agent that I talked to “thought” it was suppo...
-
It’s a Nokia model XS-250X-A thanks
-
Also, would using a switch work? I can connect the switch to the ONT and then connect the Xbox and ...
-
@LeadPipe wrote: Also, would using a switch work? I can connect the switch to the ONT and th...
-
I’ll ask but I don’t think they would be keen on it based on other conversations I had. When they b...
2024-02-07
04:13 PM
10 Kudos
I just manually updated to firmware version v1.1.4.28 on my Netgear RAX 43v2 router. After the update I can access my router through the Netgear app but am unable to get to the UI through the i...
Show results in replies (9)
-
No, only answer seems to be do a factory reset. Seems to be a firmware issue since across multiple ...
-
Used correct IP address shown in app and it takes me to the page with the error message
-
It is the default IP address for Netgear devices showing up on App
-
Used correct IP shown in app. It is the default IP for Netgear
-
Any HELP on this?
-
Well today I had the day off with nothing to do, so I figured I'd waste a couple hours of my life a...
-
Well ill be damned. Did the factory reset and setup from scratch and now it works. What good is a b...
-
Maybe make a new back up now?
-
FYI: https://community.netgear.com/t5/Nighthawk-with-WiFi-6-AX-and/New-RAX41-42-43-50-54-V2-Firmw...
2023-09-26
10:05 AM
Hi; I have the R8000P (AC4000) and about two weeks ago noticed my WiFI speed dropped precipitously from between 300-400Mbps to about 150Mbps. I am on a fiber gigabit plan through my ISP provider.&nbs...
Show results in replies (8)
-
Yes, or 192.168.1.1 or the routers IP address you may have configured on it. There is a FW update s...
-
@DesertRat66 wrote: I have the Zyxel 3000z modem. If simple enough for a l...
-
I don’t know the answer to your question but tend to believe it’s a requirement of the ISP provider...
-
Fair enough; but to be clear it is the AV installer who, based on his first hand experience with re...
-
Thanks but I think I’ve identified the bottleneck. It is FOR SURE a problem with the Netgear firmwa...
-
@DesertRat66 wrote: That said, I still don’t understand why my Netgear app shows speed of o...
-
There is a beta FW that NG came out that fixes the IP address Reservation bug.
-
Thanks for letting me know and much appreciated. But if Beta only it’ll not be available within the...