Search the Community
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
100,000 results
Sorted by:
2023-11-22
05:13 AM
After the latest updates with chrome, The certificate is not secure and I get this: This site can’t be reached The webpage at https://192.168.x.x/ might be temporarily down or it ...
Show results in replies (9)
-
Here is the solution I found: We found a fix. Delete the user's local state file located i...
-
Hi @James_MA, Try using Firefox to update Firmware (Online update) and a factory reset i...
-
@James_MA wrote: chrome --force-fieldtrials=RSAKeyUsageForLocalAnchors/DisabledLaunch ...
-
OS: Windows 11 Pro 23H2 Browser: Chrome Version 121.0.6167.161 (Official Build) (64-bi...
-
Will Netgear ever fix that sill certificate error?
-
Not a refernence, however using the ubiqutous Chrome Version 121.0.6167.161 (Offizieller Build...
-
Have same problem on Mac OS 14.3.1 (23D60) latest Chrome Chrome is up to date Versio...
-
Heya @CrimpOn Looks like you are mixing several different issues and models. ...
-
Perhaps I am not doing it correctly. Windows 11 Pro. trying to open https://orbilogin.net or ...
2023-07-07
09:55 AM
22 Kudos
I am receiving a notification message that reads, "Guest Wifi Test deep link". Does anyone know what this means?
Show results in replies (9)
-
https://status.netgear.com/orbi 7th July 2023 Multiple Push Notifications...
-
Today I received multiple notifications on my phone as shown here. Any idea what is going on? Click...
-
Same here. Just started receiving multiple "Guest WiFi Test deep link" notifications. Unable to loc...
-
Where are you seeing this? Post a screen capture? What NG product are you using?
-
Same here…anyone have any idea what’s causing it?
-
Seeing this too, same behavior.
-
Came here to find an answer to the same question
-
Hi. I've used the RBR50 for several years now - works great. But today, for the first t...
-
Me too. started about 15 minutes ago. I've gotten about 6 of these on the app on my pho...
2024-02-07
04:13 PM
10 Kudos
I just manually updated to firmware version v1.1.4.28 on my Netgear RAX 43v2 router. After the update I can access my router through the Netgear app but am unable to get to the UI through the i...
Show results in replies (9)
-
No, only answer seems to be do a factory reset. Seems to be a firmware issue since across multiple ...
-
Used correct IP address shown in app and it takes me to the page with the error message
-
It is the default IP address for Netgear devices showing up on App
-
Used correct IP shown in app. It is the default IP for Netgear
-
Any HELP on this?
-
Well today I had the day off with nothing to do, so I figured I'd waste a couple hours of my life a...
-
Well ill be damned. Did the factory reset and setup from scratch and now it works. What good is a b...
-
Maybe make a new back up now?
-
FYI: https://community.netgear.com/t5/Nighthawk-with-WiFi-6-AX-and/New-RAX41-42-43-50-54-V2-Firmw...
2023-09-08
08:21 AM
3 Kudos
New Features: 09/08/2023
Supports Separate SSID IoT network.
https://kb.netgear.com/000064267/How-do-I-enable-or-disable-the-Internet-of-things-IoT-network-on-my-Orbi-WiFi-6E-System
ht...
Show results in replies (8)
-
Followed the directions and upgraded. Did the RBS750 units first and then the RBR750. &...
-
Yes. Since we cant set static addressing on the RBS themselves.
-
Was mentioned that IoT network couldn't be separated due to the IoT app communication being blocked...
-
The error note sounds like you are using an incorrect version of the update files. So you unzipped ...
-
These are the files I have used. I re-downloaded them just to check, and no difference. &nbs...
-
Be 100% certain you are using the correct file for your Satellites. The file should have a this nam...
-
IoT addresses a long-standing customer issue: the ability to create a WiFi SSID that broadcasts onl...
-
I didn't have any issues with the update the only thing I did was cycle power to my satellite after...
2023-09-08
08:21 AM
3 Kudos
New Features: 09/08/2023
Supports Separate SSID IoT network.
https://kb.netgear.com/000064267/How-do-I-enable-or-disable-the-Internet-of-things-IoT-network-on-my-Orbi-WiFi-6E-System htt...
Show results in replies (8)
-
Update went smooth, no issues so far.
-
And those IoT devices are configured to access 2.4 GHz SSID named "KUBA" same as 5 GHz
-
Has a power off for 1 minute then back ON with the ISP modem and router been performed since last u...
-
I recently had an issue where my RBS850 satellite didn't seem to have any devices connected to it. ...
-
@Lewes1973 wrote: Is there a documentation what this exactly means: Supports I...
-
Updated both satellites (RBS850) and the Router (RBR850).... everything went really smooth (backed ...
-
Good to hear. Be sure to save off a back up configuration to file for safe keeping. Saves time if a...
-
Update went smooth, I’m using only Rbr850. Despite I had only thin brick walls my iPad was constan...
2023-11-28
02:45 AM
I have just got Starlink and can connect wirelessly to it fine. I can put it in bypass mode, plug a 2m ethernet cable into the adaptor and connect this to my Netgear 4 - Stream AX1800 WiFi 6 Router, ...
Show results in replies (7)
-
SOLVED! I put a switch in between the Starlink ethernet adapter and the cat cable which runs up to ...
-
Sorry, I can confirm, the cable is cat5e
-
Some say there is a ethernet adapter that comes from the ISP that maybe needed and or use of a non ...
-
@J27 wrote: Someone elsewhere suggested it could be an IP issue, but I’m not sure? Thanks ...
-
Thanks for your quick reply. Re your first question, the “it” in bypass mode is the Starlink rou...
-
@J27 wrote: Re your 2nd question, the adapter is the Starlink ethernet adapter you can purc...
-
@J27 wrote: I have just got Starlink and can connect wirelessly to it fine. I can put it in b...
2023-11-06
05:54 PM
Hello, Recently we were told by our ISP (Spectrum) that our Internet speed has increased from 100MB to 300MB. Not only did this not happen, but our upload speeds are now nonexistent when connected v...
Show results in replies (8)
-
Thanks FurryE38. Well I have an update! Spectrum came out and replaced the line due to errors they...
-
Thanks Furry 38. I do not have the Killer Ethernet Card. Only have the Netgear AC1900 C...
-
What "single switch in the control panel did you punch? Thx. "There's literally a si...
-
Hi swingtime! It is the "Prioritization Engine" - literally just turn it off and the issue is resol...
-
Hi swingtime! I actually answered your question- see the reply right above your most recent post.
-
Tim and Marilyn: What is the "single switch in my control panel to fix slow speeds for a NetG...
-
Thanks again Furrye38, and thanks again for this (and the earlier) helpful links!
-
I do not see a "Prioritization Engine" switch of any sort on my netgear http://192.168.0.1/&nb...
2023-08-19
02:48 AM
My router is randomly and intermittently turning off it's wired and WiFi connections, which means every device connected loses it's connection. It occurred several times yesterday and sometimes occu...
Show results in replies (9)
-
The modem is a tp link TD-W9970 in bridge mode, but it has been 100% stable since I setup the ...
-
@cuke2u wrote: The modem is a tp link TD-W9970 in bridge mode, but it has been 100% st...
-
@cuke2u wrote: Well I had another random router reboot yesterday afternoon after setting ip...
-
Indeed it does so I'll set it to that and give it a whirl, not sure though if the RAX70 supports th...
-
@cuke2u wrote: Indeed it does so I'll set it to that and give it a whirl, not sure though i...
-
@cuke2u wrote: I thought I'd found some settings that would work, as posted in the...
-
So far no disconnects 🙂 Yes my isp does support ipv6 and I've been looking at a way of implementi...
-
@cuke2u wrote: Thanks, the router has firmware version 1.0.14.134 and it's connected to a m...
-
Well I had another random router reboot yesterday afternoon after setting ipv6 to auto so I've disa...
2024-02-13
09:30 PM
I recently upgraded to a Samsung S24 Ultra. Was surprised to see a Wifi 7 icon when I had setup my phone at home with my Orbi RBE 970s. However it felt like it was slower. I still have my old phon...
Show results in replies (6)
-
It should. It could be simply rebooting the wireless allowed it to switch to the 6ghz. Some...
-
A couple points to make. 1. you don't say (and the settings don't show) if you're connectin...
-
@Sagnew wrote: Re : 5ghz vs 6ghz signals. The Wifi 7 connection is a via a 5ghz channel.--...
-
yes you're connecting to the 5ghz band and at 80hz. Not sure why its connecting at 80hz unl...
-
I am jumping around a bit .... I was playing around with the settings I noticed the "Advan...
-
Did you try swapping to a different 5ghz channel? And not sure what you mean by "more typic...
2024-02-26
09:07 AM
2 Kudos
Hi I currently have a ReadyNAS 214 device which after updating to firmware version 6.10.10, no longer allows me to install or update apps via the admin page as Netgear have now disable...
Show results in replies (8)
-
@Rickjones80 wrote: I currently have a ReadyNAS 214 device which after updating to...
-
I'm SO glad I didn't just auto-update. I saw the mention of the "Apps" change in the release notes ...
-
Thank you StevenB. I've only ever updated the firmware by simply clicking ok. I didn't ...
-
@XrayDoc88 wrote: 1. Did firmware 6.10.9 even apply to the RN628X? My NAS we...
-
Netgear has clearly already left the NAS market. Given that the Linux version on which the OS...
-
I can't believe this firmware update change! I have invested in two Netgear RN628X NAS device...
-
@XrayDoc88 wrote: How can you even downgrade now that the upload option is gone? ...
-
Thank you, I have kept a copy of the Plex deb file and I have now amended my apt sources list which...