Question about Volumes in a ReadyNAS 104
I have a ReadyNAS 104 with 4 1TB disks in. I had to remove one to test something, but upon replacing it, the drive is showing up black. My volume data is showing as Degraded. I've tried formatting t...
Netgear Nighthawk Mesh WiFi 6 - slow wifi with 1 GB service?
I just got 1 GB fiber internet service today, and all of a sudden my wifi speeds have become inconsistent! I was previously getting speeds routinely in the 400-550Mbps range. Now while in the -same ...
Summary page of differences between Nighthawk MK6*, MK7* and MK8* series? What are "S" series?
Just looking for a matrix compare of these routers?
MR6150 or MR6550?
Ive heard the x62 is better then the x65, can anyone chime in on this and give me some tips as well as some good 2x2 antennas since they only have 2 ports, thanks in advance
Inter Vlan routing between two M4250 AV switches
Hi All, We have two M4250 AV switches, with AV devices connected to the first switch having IP addresses in the range of 192.168.10.xx, and those connected to the second switch having IP addresses i...
Solid magenta ring light is on but network is OK
I had a brief outage at the ISP. When the service was restored, the Orbi (ver 2.7.5.4) became functional again but the ring light on the router is still solid magenta. I could reboot it, but w...
Cannot access router after upgrading internet with new fiber gateway
Today I upgraded from broadband to fiber. I was given a new gateway modem/router. Technician plugged my mesh network into the gateway. Enabled bridge mode on the gateway. Every device in my house is ...
GS308v3 Letter of Volatility
Hello, I need a letter of volatility for the GS308v3 unmanaged switch. Can someone provide this to me? Thanks!
SSID broadcast
Hello I've noticed an unknown SSID being broadcast when the RBE971 is online. I did not initiate this and have disabled Guest network and IoT network. The name is NTGRBH_9xxxxxxxxx Any idea ...
Bridge mode and AXmode
Hi everyone, I have the Orbi RBR850 set (2 satellites) My problem is the that my IP standard modem/router uses 192.168.178.x as its ip address base. The Orbi uses 192.168.1.x I have switched wifi...
Re: Chrome Certificate
@JBX_Industries I am not sure. The only I know is that my particular model is now listed as "End of Life" and there are zero firmware updates available anymore for it whatsoever. Haven't been si...
Re: Chrome Certificate
It looks like we have the same router type. @Architekt is the most recent downloadable version on the website signed for the router? This is my other question I asked in these forums; Sinc...
Re: Chrome Certificate
@JBX_Industries If you have the exact same model as mine, it seems like there's a signed version for the router when I visit their page to manually download it for both the router and satel...
Re: Chrome Certificate
I posted a reply earlier but for some reason it didn't show up, apologies if this winds up being a duplicate. For me the only way I can access my router is with Firefox v123.0 (which, ...
Re: Chrome Certificate
@Architekt Thank you so much for you reply. This allowed me in. So are we waiting for a firmware Upgrade to fix this issue? Because this one version on one browser is not tenable.