NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Disaster on a readynas 314 - need advice please
Going to simplify this - essentially this is all because of the 6.9.2 update causing NAS to not boot up after update. Not happy. I had 2 x 3TB drives as RAID1 in a 4 bay NAS. I installed a new 3TB drive hoping to mirror on to this, but didnt realise when I clicked add parity it turned the 3 drives into a RAID5. Resync started. I panicked, went and bought a new 4TB drive, put it in the NAS. Was in the admin / volumes page, and was hoping to make the 4TB drive a new partition, but it was late, and I thought I had clicked the 4TB, but I had clicked the 3TB that the RAID5 was syncing on, and clicked make new volume. When I realised what I did, I literally froze in shock (this is all my research / families data, and I was trying to be safe with it). I let the resync finish, which it did, and then I thought to my self I'll shutdown the NAS. Only for it to not boot again (in hind sight I should have just copied the data to the new 4TB then and there). Nothing would boot so I did a whole lot of resetting things (but with the new 4TB drive in only, new OS). I now have a fresh 4TB single drive system and when I add in the 3 other drives they show up as red in the volumes section. So basically I feel like I have a degraded RAID5 set of 3 disks (2 of which I think should be good) that won't boot. I am considering putting back in the 3 original disks (or 2, and reinstalling the OS on them from the boot menu?) WHat are my other options? I have downlaoded the logs using raidr but only when the NAS has booted using the 4TB drive, and then I insert the other 3TB drives (and they show up red). Also are others having really odd intermittent booting issues after the 6.9.2 update. Even on the new fresh install booting (and boot menu booting) are hit and miss.] ReadyNAS need your help!ReadyNAS 314 stuck on 'Booting...'
Hello, After powering on my device, it will go past the welcome screen then freeze on the 'Booting...', fans are working and device otherwise seems to be working. Any suggestions on what could be causing this? I've tried accessing the boot menu but have only got as far as the boot menu screen and haven't been able to access individual menus.