NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
JGS524PE
2 Topics
ProsSafe JGS524PE POE Not Working
I bought a ProsSafe JGS524PE ethernet switch just over 1 year ago to help support some POE cameras. THe other day I got online to check my cameras and noticed that all of my POE cameras were offline. After doing some investigation, it looks like all of my POE ports are not powering up any POE devices. I even grabbed an unused camera to plug in as a test and it would not power up. However, if I connect the same camera using a power cable to the same POE port on the switch everything comes up just fine. Does anyone have any ideas on what I can do to determine what is wrong?Solved8.4KViews0likes10CommentsJGS524PE Regularly Hangs, Stopping all Traffic, and Requires a Reboot
i have a JGS524PE PoE switch which is currently under test, prior to being installed in the network. At least once every 24 hour period the switch hangs and needs to be rebooted. During the hang, all network traffic through the switch stops, the switch cannot be managed, pinged, connected to in anyway. I've recently put the latest firmware on the switch 2.0.1.26, in the hope that that would resolve this. Traffic volumes are low, all connections are 100Mb, unrestricted, and there are only 6 ports in use - of 24. None of the connections are PoE, although some of the PoE ports are being used. Has anyone experienced similar issues with this switch? Is there a way to examine log files? Use a syslog service to interogate what is happening? I don't think I've enabled anything daft / overly complicated - certainly nothing clever like multipl VLANs or LAG groups, it's basically the default configuration, with a manual (new) IP address... but, at this rate, the switch will not be usable on a production network, and i'll be looking at replacing it.Solved