NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
ReadyNas104
3 Topics
No access to admin webinterface during raid rebuild
The readynas 104 web interface has died during data rebuild, i can ping the device but no web GUI. The LCD display status: Booting ( for last 2 hours ) It's running firmware 6.4.2 Action performed: Rebooted the unit but it's in the same state and blue led is blinking rapidly with lcd display "booting"2.8KViews0likes2Comments
Since June 18 cannot map NAS as network drive to Windows 10
I have two Netgear 4 disk RN104s with firmware 6.5.1 (upgraded this monring from 6.5) along with Windows 10 home edition build 10586.420 and up until this last weekend (18 June 2016) I was able to access the NAS by mapping them as a network drive or as netwrok locations. Since June 18 I cannot access the NAS via a mapped drive or via a network location. I used recovery to earlier Windows updates and spend 3 hours with Microsoft chat at no avail. I can get to teh NAS drives via ip (https://192.168.1.XX/admin/) and login. I have also applied this patch from Netgear, but that has not worked either. Also looking into Netgear SMB solution, but not sure how to proceed as the solution is vague. Any help would be appreciated. DMSolved12KViews1like17Comments