NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Insight management for older switches
Having recently (less than 18 months) deployed multiple GS728TPP switches, and now deploying new offices with the Insight management series, it would be great to have a firmware update to allow these older switches to be managed. I would be willing to pay for the firmware upgrade for this functionality! (rather than have to replace each switch!)
Temperature spikeon Ultra 2 plus with no activity
I have Ultra 2 running OS 6.2.4 and everything is running fine so far for last 2-days. With all the early threads about temperature & Fan issues, I have been monitoring this alittle closer. My understanding is that all the fan issues are fixed now with OS 6.2.x. I purposly did not use the system over night to monitor the temperature in the morning. I noticed there were two temperature spikes in the middle of the night. See below. Why did they occur at 01:00 and 06:30? I did see some volume activity, but do not know what it was for. I have nothing running that I know of. There was no network or utilization activity. Nothing was mentioned in the log. I could not see temperature history with OS 4.2.27, so I never could see this. Volume sync finished 2-hours earlier. Getting ready to update 2-more legacy ultra+ systems to OS 6.2.4 and want to make sure all is okay before I update. Any thoughts as to what this was? Should I be concerned?Configuration issue with ReadyNAS Ultra 2 Plus on OS 6.2.4
I just upgraded my ReadyNAS Ultra 2plus (x86) from OS 4.2.27 to OS 6.2.4. And Yes, I do know this is not supported by Netgear. I followed the instructions from a previous thread posted on 4/1/2013 R4toR6_Prep_Addon.bin (26 KB) (upload first, don't reboot, avoids the need for manual factory default in between) R4toR6_6.1.9.bin (51.8 MB) (upload after addon) Everything worked fine and the system appears to be running fine, except one small issue. When I view the configuration under "System" then "Volumes", I see the wrong image of my ReadyNAS hardware. What I am getting looks like a Rackmount picture when I am using a Desktop Ultra 2 plus. See below: The picture configuration is correct on the "System" then "Overview" screen. Did I do something wrong? Is there a way to correct this? For now I have two new 6TB drives installed with no data on them yet. Hoping for a quick good answer.
