NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
lifesupp! message
Hi, I got this message, "lifesupp! message", while doing a resync (complete history follows) and I think I need some help from experts due the previous messages in this forum about this error. - My nas is a ReadyNas Pro with 6 bays, all equipped and disks were synced. - After a failure in disk 2 I procced to replace it but, during the resync, the disk 6 started to report failures. - At some point I got the following mail from the NAS: > Complete RAID volume synchronization in C. However, the array is still degraded mode. This may be due to failure of disk synchronization damaged or the presence of a disk array in multiple parity disks. - Looking at /proc/mdstat gives me this information: > Personalities : [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] > md2 : active raid5 sdf5[8](S) sda5[0] sde5[7](F) sdd5[4] sdc5[6] sdb5[2] > 9743966480 blocks super 1.2 level 5, 16k chunk, algorithm 2 [6/4] [U_UUU_] > md1 : active raid6 sdf2[8] sda2[0] sde2[6] sdd2[4] sdc2[7] sdb2[2] > 2096896 blocks super 1.2 level 6, 64k chunk, algorithm 2 [6/6] [UUUUUU] > md0 : active raid1 sdf1[8] sda1[0] sde1[7] sdd1[4] sdc1[6] sdb1[2] > 4194292 blocks super 1.2 [6/6] [UUUUUU] > unused devices: <none> - Status in control panel So, the question now is: what are the following steps? I have ssh access and a good technical background. Thanks.
