NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
SRX5308 - VPN Problems
Serious issue here. currently after swapping an UTM25 at one site for the SRX5308 in it's place, a problem still persist with only getting 1/2 of the WAN bandwidth. secondly after transferring large packets of data across a vpn to the device, it shuts down externally, but works fine internally. even though all vpn tunnels are still established, there is no connectivity between the vpn(s) to this device nor can i access it via the web interface with the wan ip. i mean it completely shuts down external connectivity. i have already factory defaults this router initially when it had this problem with firmware 3.0.7-29, and now again with firmware 3.0.7-45; and just for kicks, i rebooted the router and tried sending 5GB across to it, and it shutdown 1/2 through this time...
Please help with setup of UTM25
We bought a UTM25 for our new server, we have 2 servers, my hope was to get both servers on this UTM25, i have 2 static ips one for each server, the old server is configured like this Router(static ip 91.143.x.1) server (local ip 192.168.x.1) I hope to do this Router (static ip 91.143.x.1 and 91.143.x.2) server (local ip 192.168.x.1 and192.168.x.2) is this possible and how do i do ? i read about it here but the link mention dosent work? :( http://forums.prosecure.netgear.com/showthread.php?t=926 i can not find Rules/Add Rule/WAN Destination IP Address, "Other Public IP Address". also mention in abowe link? Hope someone is kind to help me :)