NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
CAX30 Xfinity issue (FIXED)
Like all of you, I was bashing my head against the wall wondering what was going on with my router.
I got a call from xfinity today saying they had 300+ calls in the past few hours just due to this.
I figured out it has something to do with the traffic meter....
To fix this, factory reset the router by sticking a small pin into the back of the hole and holding it for like 7 seconds.
After that, give it a bit of time and then go to your nighthawk app. The login will be "admin" for the username and "password" for the password.
Now, go to your computer and type in "192.168.1.1" It will make you create a new password - do it.
Then, go to the advanced tab, then click "advanced settings" and scroll to traffic meter. Turn it on, click apply. Then turn it off, and click apply.
I don't know why this works, but it's the only thing that worked for me. Hope this can help someone else out.
- To anyone else finding this thread, this will work.
After resetting the router and downgrading back to the older firmware V1.4XX (not V2), and resetting again, it will work normally. There is a tutorial on how to go back to the old firmware on YouTube. You just download the zip file, extract it and then “upload” the file into the router and wait for it to be done.
So:
*before you start this process below, you MUST download the older firmware and upload it into your router by going to 192.168.1.1 on your web browser and logging in, and uploading it.
1. Factory reset the router by holding a pin in the back for 7+ seconds
2. Wait for the router to do its thing (about 2+ mins) and then go to the Wi-Fi on your phone, connect using the password on the side of your router.
3. Once connected to the network, open up the Nighthawk App. Type in “admin” for username and “password” for the password.
4. Go to the settings on the app, change back your Wi-Fi network names to your choosing and change the password for both networks to your choosing (both 2.4 GHz and 5 GHz). This process will take awhile to load, but just wait for it to complete.
5. Go to your PC, type in 192.168.1.1 on the internet browser.
6. Enter admin as the username and the new password you just created in Step 4 and login.
5. That’s it - you’re done. You’ve now re-enabled Wi-Fi at full speed and the router should function normally.
On a side note:
To the Netgear management team/engineers: This entire debacle could’ve been totally avoided and should have been double-checked before an update to the firmware was sent out that killed 10,000+ peoples’ internet connectivity. For a router that costs over $300 MSRP, this is unacceptable. We pay a premium for the Netgear brand and this has been very disappointing. Poor quality control, bad firmware and a lack of immediate response is not okay. I was about to spend $100 on an Xfinity technician because I had no idea this issue was so widespread the first 2 days and thought my ISP connection went bad, and I know many others who have spent $50+ on tech repairs that were unnecessary, because they thought their ISP or router was broken too. Instead, the fix is this giant, long process and requires us to revert back to OLD firmware. This has made me seriously re-think all future Netgear purchases. Do better.
34 Replies
Replies have been turned off for this discussion
Interesting why TM would be helpful or a cause.
I'll pass this on to NG for review.
Let get this into the right forum as well.
Thank you.
- Yeah I’m not sure why it works - but it does.
If I didn’t turn the traffic meter on, then off - then my internet wouldn’t work. It was only until I did that portion of the solution that things reconnected.Ok, thanks for the additional info. I'll pass this onto NG.
Please mark your thread as Solved so others will know.
thank you for the directions to fix. I was about to spend $50 to speak with NetGear. Though, because I had previously tried the typical fixes myself, lost the ability to use the Admin username. I even had to leave the house to get away from home wifi. Then was able to log in using Admin on an iPad as a workaround. Thanks again.
- I independently found the traffic meter solution yesterday before learning about these forums. Putting 0 as the default limit doesn't make any sense. I was convinced the problem was my ISP because I didn't know Netgear auto updates firmware. Next time I'll come straight here for answers.
You may want to downgrade FW to v1.4x as well:
- I downgraded to FW 1.4 but now I can’t enable 1801 mbps speed in my settings. It’s stuck at 430 mbps max on 5G setting
Hello,
I tried resetting my modem/router and it won't revert back to its original settings.
Its almost as the internet wont go through nor will it show the factory SSID name.
how can I fix this?
You may want to downgrade FW to v1.4x as well:
fuzzyrice wrote:
Hello,
I tried resetting my modem/router and it won't revert back to its original settings.
Its almost as the internet wont go through nor will it show the factory SSID name.
how can I fix this?
Thanks folks suggestion. Try factory reset as well as enable/disable traffic meter. Modem works for few hours and hit Internet down issue again. Both Workaround effects are the same as rebooting modem.
Version is V2.1.3.10.
Please downgrade the CAX30 to v1.4x please. v2 has problems and was pulled.
ztan wrote:
Thanks folks suggestion. Try factory reset as well as enable/disable traffic meter. Modem works for few hours and hit Internet down issue again. Both Workaround effects are the same as rebooting modem.
Version is V2.1.3.10.
- Mine was working for a bit….now nothing. I’m having the same issue as before. I’m about to throw the damn router out the window and never buy a netgear product again.
