× NETGEAR would like to hear from you about specific features so we can improve your experience. To participate in this survey please click HERE.
Reply

CM2050V - How do I log in?

sdv26
Aspirant

CM2050V - How do I log in?

I'd like to log in and change the default password. My current setup is the CM2050V connected to an Orbi RB850. This presumably is one of the two ways they mention to access the router login. From the manual:

 

Connect a WiFi router to your cable modem using an Ethernet connection, and
then connect a computer to your router using a WiFi or Ethernet connection.


2. Launch a web browser.
3. Enter http://192.168.100.1

 

Unfortunately, when I put in that address it doesn't work. Nor does the IP that the router might have from Spectrum.

 

Is my only solution a direct ethernet connection to the modem?

 

Thanks in advance

Message 1 of 5

Accepted Solutions
FURRYe38
Guru

Re: CM2050V - How do I log in?

So change the IP address of the RBR back to 192.168.1.1 or 192.168.0.1 then try 192.168.100.1. The Orbi system should not be in the same subnet as the modems IP address. 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CAX80 Modem Mode |  Wifi Router MK83+ (Router Mode) | and RBK853 (Router Mode) | Switches NG GS105/8, GS308v3, GS110MX and XS505M | Additional NG HW: C7800/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: MK63, MR6150, R7000, R7800, R7960P, R8000, R8500, R9000, RAXE500, RAX50, XR450, XR700, XR1000, EX7500/EX7700

View solution in original post

Message 4 of 5

All Replies
FURRYe38
Guru

Re: CM2050V - How do I log in?

That address should work...

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CAX80 Modem Mode |  Wifi Router MK83+ (Router Mode) | and RBK853 (Router Mode) | Switches NG GS105/8, GS308v3, GS110MX and XS505M | Additional NG HW: C7800/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: MK63, MR6150, R7000, R7800, R7960P, R8000, R8500, R9000, RAXE500, RAX50, XR450, XR700, XR1000, EX7500/EX7700

Message 2 of 5
sdv26
Aspirant

Re: CM2050V - How do I log in?

It doesn't seem to, even when I have my Orbi LAN settings as follows:

192.168.100.2 (Orbi IP)

Use Router as DHCP Server YES

192.168.100.2 to 192.168.100.254 as the Range

Message 3 of 5
FURRYe38
Guru

Re: CM2050V - How do I log in?

So change the IP address of the RBR back to 192.168.1.1 or 192.168.0.1 then try 192.168.100.1. The Orbi system should not be in the same subnet as the modems IP address. 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CAX80 Modem Mode |  Wifi Router MK83+ (Router Mode) | and RBK853 (Router Mode) | Switches NG GS105/8, GS308v3, GS110MX and XS505M | Additional NG HW: C7800/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: MK63, MR6150, R7000, R7800, R7960P, R8000, R8500, R9000, RAXE500, RAX50, XR450, XR700, XR1000, EX7500/EX7700

Message 4 of 5
rlyon534
Aspirant

Re: CM2050V - How do I log in?

Actually for a new CM2000, replacing a CM1000 along with a new RAXE 500 router.  Initial setup with the app.  Everything was happy but no internet.  Used Xfinity support to verify the modem connection.  OK.  Still no internet.  Couldn't connect direct to the router using the IP address in the manuals.  192.168.1.1 worked.  Was able to resolve the internet connectivity from there.  System is alive again .  Good download speed, just under 1gb, through the router, ethernet connection.  (We'll see if that lasts.) (grin ) Thanks.

 

Message 5 of 5
Top Contributors
Discussion stats
  • 4 replies
  • 391 views
  • 1 kudo
  • 3 in conversation
Announcements

Orbi WiFi 6E