Orbi WiFi 7 RBE973
Reply

Re: Downstream light keeps blinking

Kim1888
Aspirant

Downstream light keeps blinking

Hello how did you fix this?

Message 1 of 4
FURRYe38
Guru

Re: Downstream light keeps blinking

What NG modem model are you referring too?

 

Please post a copy and paste of the modems connection status page.
Have the ISP check the signal and line quality UP to the modem. Be sure the ISP provisions the modem correctly.
Be sure there are no coax cable line splitters in the between the modem and ISP service box. 
Be sure your using good quality RG6 coax cable up to the modem. 
Be sure to power OFF the modem for 1 minute then back ON.
https://community.netgear.com/t5/Cable-Modems-Routers/General-info-and-Troubleshooting-for-Cable-Mod...
https://kb.netgear.com/24311/Power-level-guidelines-for-a-NETGEAR-cable-modem-router?article=24311
https://www.duckware.com/tech/solving-intermittent-cable-modem-issues.html

Message 2 of 4
Kim1888
Aspirant

Re: Downstream light keeps blinking

The model is c7000v2
Message 3 of 4
plemans
Guru

Re: Downstream light keeps blinking

If the downstream light is blinking, it means only 1 channel is locked and its searching for more channels. 

You need to post a screen snip of the cable connections page and the event logs for us to help you better. 

But you can start with a few troubleshooting tips. 

Start with removing any amplifiers, signal attenuators, or splitters from the coax.
From there check the line for kinks, damage, moisture in the line.
Check the connectors for improperly made ends, foil touching the copper coax line, bad/old/cheap connectors, or corroded connections. Replace them if you do.
If you can, simply connect the modem right where the coax comes into the home. This prevents wiring in the home from being the issue. And some ISP’s charge if the wiring issue is in the home. So this helps prevent this.

Message 4 of 4
Top Contributors
Discussion stats
  • 3 replies
  • 811 views
  • 0 kudos
  • 3 in conversation
Announcements

Orbi WiFi 7