D7000 Firmware Version V1.0.1.50_1.0.1
ADVANCED > Setup > QoS Setup: Speedtest
Uplink band width check Assistant
Attempting to detect uplink bandwidth . Please Wait
About 40 seconds later:
The Speedtest fails to detect the bandwidth, please check your
Internet connection or try again later. [OK]
For completeness, near the "Speedtest" button:
Uplink bandwidth Maximum [512] [Mbps]
RST_statistics.htm:
ADSL Link Downstream Upstream
Link Rate 6912 Kbps 896 Kbps
My Internet connection is fine (as fine as ever, anyway). A real
speed test (http://www.speedtest.net/) works properly.
Does this built-in "Speedtest" feature work for anyone?
