NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
How to unbrick the Nighthawk R7000 using OS X and TFTP
Hi,
After spending a night on unbricking my R7000 and how I struggled to work with all the manuals out there but none of them actually worked. I thought I should share what actually worked for ...
HOLY COW IT WORKED!!!
nmrpflash worked!!! Switching to a Static IP address and turning my Wifi off did the trick!!
Also, recommend using -vvv to double check when it works. Took me two tries to nail the timing because the router has to finish restarting for the packet transfer to begin before the command times out.
Moonweasel , I have the same error. Did you figure out how to fix this?
> Moonweasel , I have the same error. [...]
"same" as _what_?
> [...] Did you figure out how to fix this?
"this"? _What_?
Rather than starting your own thread for your own problem, you've
joined a many-months-old thread with thirty-odd postings. Pronouns and
other vague references are approximately useless here.
- This is my question/reference, it’s the second reply in this thread:
>For me the method still does not work, because in Step 3, ping returns mostly
Request timeout for icmp_seq xx
without the
ttl=100>>
—- Did you get a solution to the above?