NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Netgear Nighthawk R8000P Firmware Update
Firmware not updating manually nor via router web check option. Nighthawk R8000P Current Firmware Version: 1.4.1.50 Update Firmware Version: 1.4.1.62 I have attempted to update the firmware via the Ro...
I also was unable to update router firmware with the Nighthawk App, it would go for about 2 minutes, then fail, saying to "Try Again" later, which never worked. But it succeeded when I used a browser (FireFox) to 192.168.1.1 and chased it down that way.
I still have no luck, I tried it again with the router with all devices diconected including modem. and only had a laptop only connected via ethernet by port 1 it self to do the update. I even try doing a factor reset too before updating. The router would go through the motions of acepting the update with the chk file, progress bar moves to the right, get message its rebooting.. But afterwards it still shows that V1.4.1.50_1.3.10 is running.
Greetings,
Using TFTP is another option for firmware update. This is normally used for recovery, but you can perform an upgrade/downgrade as well.
Problem STILL not solved. Honestly **bleep** netgear and their **bleep** customer support. I can't update manually or automatically to the latest firmware. My router is bricked.
This is such garbage on Netgears behalf. Why is this problem not solved and Why has Netgear refused to comment? The current firmware cuts my speed in HALF from what I should be getting and has serious QoS issues!
I've escalated this topic to the moderators for investigation.
AndreCarraretto wrote:I was able to upgrade normally as I had already moved from 1.4.1.50 -> 1.4.1.56 (beta). From 1.4.1.56 to 1.4.1.62 was a normal (no errors) upgrade.
Same for me as you already know.
I was able to upgrade normally as I had already moved from 1.4.1.50 -> 1.4.1.56 (beta). From 1.4.1.56 to 1.4.1.62 was a normal (no errors) upgrade.
I tried to do the TFTP method today using the
windows tftp method
https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP
and the tftp client method.
https://kb.netgear.com/000059633/How-to-upload-firmware-to-a-NETGEAR-router-using-TFTP-client
both methods failed and my router is still running version 1.4.150_1.3.10
I also notice that there is a discrepency on step 6 of the second method(client tftp) "Turn router OFF for 10 seconds and then turn it back ON." and on step 7 and 8 of the first method windows 10 tftp client. (Hold down the reset button on the back of router with a paper clip and Power ON the router while holding down the reset button."
I tried each method and it didnt work.. On a side note I was able to back up and restore my configuration settings using the routterlogin.net webpage, so i know that my web browser is working uploding a file just fine.