NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Network setup based on Nighthawk X10
Hello! I want to setup my network. But I found something that I'm not sure about. In this config: Netgear X10 connected to Netgear Managed Switch XS708E, and to this managed switch I want to connect...
> Edit network settings means:
If you say so.
> I connect a NAS to unmanaged switch, that is connected to managed
> switch, that is connected to router. Could I make NAS LAN IP Static?
Sure. Why not? A tree of network switches serves to connect
multiple devices. It does not determine how those devices are
configured.
As usual, it might help if you would explain what you actually want
to accomplish (or the actual problem which you wish to solve), rather
than asking an abstract question which may be based on some fundamental
misconception.
> [...] could I see (and edit networking setting such as static LAN IP
> adress) devices connected to unmanaged switch in console of managed
> switch or router console?
I don't know what that means. "edit networking setting" on _what_,
_how_?
Generally, devices which are connected to a tree of network switches
(managed or not) should be on one big LAN, and any connected device
should be able to communicate with any other connected device.
- Edit network settings means:
I connect a NAS to unmanaged switch, that is connected to managed switch, that is connected to router. Could I make NAS LAN IP Static?> Edit network settings means:
If you say so.
> I connect a NAS to unmanaged switch, that is connected to managed
> switch, that is connected to router. Could I make NAS LAN IP Static?
Sure. Why not? A tree of network switches serves to connect
multiple devices. It does not determine how those devices are
configured.
As usual, it might help if you would explain what you actually want
to accomplish (or the actual problem which you wish to solve), rather
than asking an abstract question which may be based on some fundamental
misconception.- Thank you!
And what I want to do: I want to asign static IPs to all LAN devices. And to avoid many cables per room I'm going to use rack mounted managed switch and patch panel with 1 cable per room. In each room unmanaged switch from Asus to give all 8 possible clients per room 1 Gbps connection to the rack mounted RAID 5 NAS. :)