NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Router Unable to Boot, Stuck in Bootloop
Hi all, I am having trouble with my Netgear Nighthawk X6 R8000 currently. I have had this router for 5.5 years (since August 8, 2014) and it is currently running on the latest firmware (1.04....
Issue has been resolved, please see post #5 of this thread:
it_geek wrote:I currently managed to reboot the router. Only issue is that the Wireless component of the router cannot startup. I have not reset it because mission critical applications are running now. I will do it once the mission critical application has completed its task. But prior to that, I will downgrade to a previous version and hope for the best.
I doubt if a factory reset is the right move.
Your firmware is clearly acting up.
When you are ready, what you could try is to reflash the firmware. Even the latest version might work. It will overwrite the corrupt version on the device.
One thing I would not do is turn the router off. If it is in a fragile state, rebooting it again is asking for trouble.
When you do update the firmware, do it with a browser and a wired connection to the router. It sounds like this is the only option if the wifi won't work. Updates over wifi are asking for trouble.
I am in complete agreement with you that a factory reset is unlikely to solve anything. I have only resetted the device for real once in its 5.5 year lifespan anyway.
But I am doubtful that the firmware itself is actually corrupt, and the problem smells of hardware failure... I have always assumed that the firmware is a static asset on the router which isn't changed, and that the settings are independent of the firmware, although the change of certain settings may activate certain parts of the firmware. That is, unless you are suggesting that the settings are part of the firmware itself.
In any event, I will perform the downgrade to an older firmware version first via LAN and hope for the best!