RAX20: can I set WPA3-SAE+WPA2-PSK mixed?

[roytam1]

Other brands can set WPA3-SAE+WPA2-AES mixed mode, so clients that supports WPA3-SAE can use WPA3, while older clients can still use WPA2-AES.

but how to do this with RAX20?

[FURRYe38]

So you see mixed modes on the routers web pabe under Basic Tab/Wireless settings? 

[roytam1]

not with netgear routers, but routers of other brands can do this.

[FURRYe38]

If you need this then you should return the RAX and find something that does.

Good Luck.