This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
I have a Nighthawk AX4 RAX38v2. It worked fine, but I had to turn it off for two weeks and when I turned it back on, it stopped working. The internet access LED does not light up. After rebooting, the app reports that no cables are connected. If I plug the cable directly into the PC, it works fine. I'm trying to set up a WI-FI router using the netgear app (android). I've tried several versions of frameware, including the newest, but it never works. I called my ISP and they couldn't do anything. I tried setting it up through the app and from the PC, but only changed the SSID. This has not helped. Please help me sooner rather than later.
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too? Be sure your using a good quality LAN cable between the modem and router. CAT6 is recommended.
Has a power off for 1 minute then back ON with the ISP modem and router been performed since last update? Be sure to restart your network in this sequence: Turn off and unplug modem. Turn off router and computers. Plug in and turn on modem. Wait 2 minutes for it to connect. Turn on the router and wait 2 minutes for it to connect. Turn on computers and rest of network.
I just tried resetting and rebooting in the sequence you wrote - didn't help. I also changed the DHCP, but that didn't help either. I don't know the Mfr and model# of the modem/ONT of the ISP that the NG router is connected to. But I can call my ISP tomorrow when they start working again if that could be the cause. There is a CAT5 LAN cable connected to the NG.
Ok. Ya the ROUTER isn't getting any connection from the ONT thus it's reporting not seeing the connection.
Do you have a friend, neighbor or family member around where you could take the RAX router to and temp connect it it there to see if it works at a different location?
I connected a wifi router at my friend's apartment, he has a different internet provider. This router works fine at his place. What does that mean? How can I fix it?
My ISP specialists came to my place and fixed the error. I didn't find out the cause, but they worked for a long time, then they pulled the CAT5E cable and my router worked. Thank you very much, FURRYe38!
.png){kind=link}