This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
Start a New Discussion
Hi all
What's about this problem. I sink I have the same issue.
Is an update on the queue?
Kind regards
Carlos
Solved! Go to Solution.
The 4.3.3.200 Release notes show
Could this be the DHCP issue or connection delay you experience?
View solution in original post
What orbi model # are you referring too?
Need more details on what this problem is?
@CHCarlos wrote: Hi all What's about this problem. I sink I have the same issue. Is an update on the queue? Kind regards Carlos
Hi,
Sorry for the delay.
I have the AX6000 WIFI Mesh Router (SXR80) with to satelites SXS80.
The problem is that the DHCP Request from PC's LAN wired are very slow 10-30s.
This problem is coming with the news firmware release.
Has a factory reset and setup from scratch been performed since last FW update?
What is the brand and model# of the ethernet adapter in the PCs?
Be sure any ethernet adapter drivers are up to date from the ethernet mfr.
@CHCarlos wrote: I have the AX6000 WIFI Mesh Router (SXR80) with to satelites SXS80. The problem is that the DHCP Request from PC's LAN wired are very slow 10-30s.
How are these PCs resp. the LAN connected to the SXR80 or to the SXS80? How are the port(s) and switches/switch ports configured?
@CHCarlos wrote: This problem is coming with the news firmware release.
Referring to the 4.3.2.100 from the subject line? SXR80 / SXS80 Firmware Version 4.3.3.200 is out since about one day as of writing. What does e.g. https://www.wireshark.org/ "see" (just with the dhcp filter) when the LAN systems are requesting DHCP?
Many thanks for the new firmeware. It's solves all my problems.
Thank for your support!Kind regardsCarlos
Be sure to save off a back up configuration to file for safe keeping. Saves time if a reset is needed. https://kb.netgear.com/000062080/How-do-I-back-up-the-configuration-settings-on-my-Orbi-WiFi-SystemEnjoy. 📡
