- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
ATTN RBR960 Orbi network users! Need a piece of info from you
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
ATTN RBR960 Orbi network users! Need a piece of info from you
HI all, we are trying to hunt down an anomaly that may be an issue and may not be - namely, that the 960 series of Orbi routers seems to regularly use more memory out of its 818MB than older Orbi systems.
So here is how to check and what to post - assuming your router IP address is 192.168.1.1, open your browser and go to http://192.168.1.1/debug.htm. It may complain about it not being secure, as it's not an https page. But hopefully you can get to it (I use Chrome/Mac or Edge/Windows and they work). It will ask you to log in like you would to log into your browser's main web page - user name - admin, pw - you password.
You will get a page of info about the router - the top section looks like this, please post just the two circled values, CPU Load and Memory Usage:
Again, just 960 series routers only please! My values are, as you can see:
CPU - 14.00%
Memory 564MB/818MB
Thank you very much! I and others will be examining the results.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
Here’s my info
Basic Information
Firmware Version: V6.3.7.10_3.3.3
seal: v2.1.5.48-0
seal_services: v2.1.5.18-0
armor-bd: v2.2.100.3
spc-circle: v3.26.1.1
CPU Load: 15.98%
Memory Usage(Used/Total): 425 MB/811 MB
System Uptime: 18 days 09:32:30
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
Interesting, using older FW.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
Basic Information
Firmware Version: V7.2.6.21_5.0.20
CPU Load: 12.57%
Memory Usage(Used/Total): 420 MB/818 MB
System Uptime: 27 days 03:44:51
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
@BerserkRico What is the BootLoader version on your RBR please?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
Basic Information
Firmware Version: V7.2.6.21_5.0.20
Boot Loader Version: 2016.01_rtm-5.0.1.32
seal: v2.1.5.49-0
seal_services: v2.1.5.20-0
armor-bd: v2.2.100.3
spc-circle: v3.31.1.2
CPU Load: 10.11%
Memory Usage(Used/Total): 357 MB/818 MB
System Uptime: 2 days 04:34:50
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
Wow...am I the only one on Boot Loader version 2016.01_rtm-6.0.2.21....?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
Yeah I didn't volunteer for it 🤔
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
Basic Information
Firmware Version: V7.2.6.21_5.0.20
Boot Loader Version: 2016.01_rtm-6.0.2.21
Seal: v2.1.5.49-0
seal_services: v2.1.5.20-0
armor-bd: v2.2.100.3
SPC-Circle: v3.31.1.2
CPU Load: 15.56%
Memory Usage(Used/Total): 448 MB/818 MB
System Uptime: 28 days 00:26:4
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
Router Debug Screen Information
Device: RBRE960 WiFi Access Point
Firmware Version: V7.2.6.21_5.0.20
Boot Loader Version: 2016.01_rtm-5.0.1.32
seal: v2.1.5.49-0
seal_services: v2.1.5.20-0
armor-bd: v2.2.100.3
spc-circle: v3.31.1.2
CPU Load: 9.97%
Memory Usage(Used/Total): 340 MB/818 MB
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
I believe Dons was manually applied as I had referred him to v7 FW soon after I got his 960.
Ya Mine was manually applied as well. Only thing I can think of that our units are 1st gen HW. Recently bought units may already be loaded with v6.x BL version, and just applying v7 FW may not effect anything here.
Wondering if someone that has 1st gen HW, downgraded back to v.6 FW then let there system re-update via AU, if the BL would get updated to v6.x. I've asked for more info from NG on this. Would like to know for sure what we should be seeing and expect.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
Basic Information
Firmware Version: V7.2.6.21_5.0.20
Boot Loader Version: 2016.01_rtm-6.0.2.21
seal: v2.1.5.49-0
seal_services: v2.1.5.20-0
armor-bd: v2.2.100.3
spc-circle: v3.31.1.2
CPU Load: 22.72%
Memory Usage(Used/Total): 367 MB/818 MB
System Uptime: 0 days 20:33:30
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
Firmware Version: V7.2.6.21_5.0.20
Boot Loader Version: 2016.01_rtm-6.0.2.21
seal: v2.1.5.49-0
seal_services: v2.1.5.20-0
armor-bd: v2.2.100.3
spc-circle: v3.31.1.2
CPU Load: 28.29%
Memory Usage(Used/Total): 447 MB/818 MB
System Uptime: 0 days 02:16:19
Just installed today, manually firmware updated on both satellites and main, running in AP mode.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
Here is mine on an older firmware I’m still running..
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
Boot Loader Version: 2016.01_rtm-6.0.2.21
seal: v2.1.5.49-0
seal_services: v2.1.5.20-0
armor-bd: v2.2.100.3
spc-circle: v3.31.1.2
CPU Load: 10.86%
Memory Usage(Used/Total): 418 MB/818 MB
System Uptime: 16 days 14:59:44
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
Keep in mind, I reboot my unit at least once a week.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: ATTN RBR960 Orbi network users! Need a piece of info from you
Thank you for all your replies! As we research this further, I am going to make an educated guess on whether or not you have IPv6 enabled (or have the service from your ISP. Can you confirm whether or not you have IPv6?
Has IPv6 enabled:
Does not have IPv6 enabled/operational:
Thanks for your assistance!
• What is the difference between WiFi 6 and WiFi 7?
• Yes! WiFi 7 is backwards compatible with other Wifi devices? Learn more