NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
How do I adjust RIP settings on RBRE960 router?
I'm having a hard time connecting some Elgato Key Lights to my network. I did some research on r/elgato, and several users said the solution is to enable RIP (routing information protocol) in the rou...
The Orbi app does not provide access to any "advanced" functions. Settings for RIP can be found on the orbi web interface http://orbilogin.net Advanced Tab:
p.s. Most "Internet of Things" (IoT) devices work just fine without changing any of the default Orbi settings.
Are they connecting on the IoT network?
No, I keep getting "unexpected errors" when I try to connect the lights to the IoT network.
Here's the interesting thing: I had no trouble connecting these lights to my Netgear RBK53S-100NAS Orbi AC3000 system in my previous home. When we moved to the new home, I purchased the RBRE960 router thinking it would be an upgrade. Maybe it was, but there is something different about this network that the Elgato Key Lights don't like. Any idea what that might be?
I think I still have the RBK53S system somewhere. I guess I could set that up again and see if it solves the problem.
As mentioned, I have the "Mark II" version of the Key Lights (which are supposed to be compatible with 5 GHz networks) on the way. But this is an expensive solution at ~$325.
I also ordered a couple of Logitech Litra Beam lights to test out. They have physical controls/a Bluetooth remote and don't have to be on the WiFi network. They aren't as bright and capable as the Elgato Key Lights from what I've read, but they're about $125 cheaper for the pair.
Ideally, I'd like to be able to get my existing lights to work as they did before while preserving 5 GHz on my network.
Someone on r/homenetworking suggested another solution: "Buy a cheap repeater (Linksys, TP-Link, and others make these, and you can get them at Walmart, Best Buy, etc or online at Amazon, Newegg, and the like). Create a 2.4Ghz SSID on it, and connect your lights to that network. Plug the repeater directly into your main router node, or one of the satellites, via ethernet and you should be good to go."
What do you think of that idea?
Ya any 2ndary 2.4Ghz wireless AP connected would work as a alternative for these devices.
Would you mind making a recommendation for a cheap repeater I could buy on Amazon or Best Buy for this? I want to make sure I get the right device. Thanks!
Get you one of these as a wired AP connected to the back of the RBR.
Doesn't have to be new, get one of the used ones. I've bought a few used NG routers off amazon. Work well.
Thanks again! It looks like I just need to turn off the "SmartConnect" feature to get separate 2.4 and 5.0 GHz bands.
The Logitech Litra lights will arrive tomorrow. I'll compare them with the Elgato Key Lights I have. If these work well, they're probably the best solution because I got them for not much more than the cost of the Nighthawk access point, and I can use them without setting up an additional network.
The Key Lights (Mark II) will arrive next Wed. If they connect right away to my existing network and produce much better light than the Logitech Litra, then I'll have to decide whether the $200 difference (between what I spent on them vs. what I'd spend on the Nighthawk) is worth it.
I really appreciate your help. Thank you!
On the 2ndary router? Yes, Since it's a non MESH router, it has the ability to disable Smart Connect and disable 5Ghz as well.
Let us know how things work out.