NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
FURRYe38
Sep 15, 2021Guru
New RBR750 / RBS750 Firmware Version 4.6.3.16 Released
Security Fixes:
Fixes security vulnerabilities.
For more information about security vulnerabilities, visit https://www.netgear.com/about/security.
Bug Fixes:
Fixes the issue where the s...
Stephonline
Sep 15, 2021Guide
My experience with the V 16 upgrade is mixed and hard to understand.
As suggested, I powered off all my devices and let the nighthawk docsis modem sync up, and then repowered my main router, let it sync, then repowered the satellite.
I did not do a factory reset which the Netgear admin said was ok.
For about 10 hours, everything was great. Download speeds as measured by the Orbi app were back to 900 mb. Thruput - both wired and wireless was excellent: 600 on wired connections and 400-500 mb on wireless.
Suddenly the wireless thruput as measured on the speed test dropped to 10 - 20 mb. The hardwired speed test had not changed. The Orbi app still reported download for ~800/850 mb but there was just a trickle of data being pumped out of the system.
I have several wired devices (an Apple 4k streamer) connected to the satellite. They were stuttering and buffering all over the place.
I checked the modem and the connection, SNR, and power levels were all nominal. I do not think it was a provider issue.
I repowered the base station and the satellite - let everything sync up and now I'm back to 400 - 500 mb wireless.
Does anyone have any thoughts?
Last point: this was the behavior that the migration to version 4x initiated.
Model: RBR50|Orbi AC3000 Tri-band WiFi Router
As suggested, I powered off all my devices and let the nighthawk docsis modem sync up, and then repowered my main router, let it sync, then repowered the satellite.
I did not do a factory reset which the Netgear admin said was ok.
For about 10 hours, everything was great. Download speeds as measured by the Orbi app were back to 900 mb. Thruput - both wired and wireless was excellent: 600 on wired connections and 400-500 mb on wireless.
Suddenly the wireless thruput as measured on the speed test dropped to 10 - 20 mb. The hardwired speed test had not changed. The Orbi app still reported download for ~800/850 mb but there was just a trickle of data being pumped out of the system.
I have several wired devices (an Apple 4k streamer) connected to the satellite. They were stuttering and buffering all over the place.
I checked the modem and the connection, SNR, and power levels were all nominal. I do not think it was a provider issue.
I repowered the base station and the satellite - let everything sync up and now I'm back to 400 - 500 mb wireless.
Does anyone have any thoughts?
Last point: this was the behavior that the migration to version 4x initiated.
Model: RBR50|Orbi AC3000 Tri-band WiFi Router
FURRYe38
Sep 15, 2021Guru
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
What is the size of your home? Sq Ft?
What is the distance between the router and 📡 satellite(s)? 30 feet or more is recommended in between RBR and RBS📡 to begin with depending upon building materials when wirelessly connected.
https://kb.netgear.com/31029/Where-should-I-place-my-Orbi-satellite 📡
What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and 40 to 48 channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?
Try disabling the following and see:
Armor.
Set 20/40Mhz Coexistence to 40Mhz only. Set CTS to 2347. Save settings and reboot the router and satellite(s). Under Advanced Tab/Advanced Settings/Wireless Settings
Stephonline wrote:
My experience with the V 16 upgrade is mixed and hard to understand.
As suggested, I powered off all my devices and let the nighthawk docsis modem sync up, and then repowered my main router, let it sync, then repowered the satellite.
I did not do a factory reset which the Netgear admin said was ok.
For about 10 hours, everything was great. Download speeds as measured by the Orbi app were back to 900 mb. Thruput - both wired and wireless was excellent: 600 on wired connections and 400-500 mb on wireless.
Suddenly the wireless thruput as measured on the speed test dropped to 10 - 20 mb. The hardwired speed test had not changed. The Orbi app still reported download for ~800/850 mb but there was just a trickle of data being pumped out of the system.
I have several wired devices (an Apple 4k streamer) connected to the satellite. They were stuttering and buffering all over the place.
I checked the modem and the connection, SNR, and power levels were all nominal. I do not think it was a provider issue.
I repowered the base station and the satellite - let everything sync up and now I'm back to 400 - 500 mb wireless.
Does anyone have any thoughts?
Last point: this was the behavior that the migration to version 4x initiated.
Model: RBR50|Orbi AC3000 Tri-band WiFi Router