This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
Ok. Glad ethernet worked. It should have. Unless the FW is way off or the RBS are in some bad condition.
Will keep asking about bringing the RBS self web page services back. It was available on the 8 series early on but someone decided to take it away. Would have been nice to have it here.
I upgraded my AXE Orbi system to 6.3.1.21 very soon after it came out, but then had issues and rolled back. It was pulled from https://www.netgear.com/support/download/?model=RBKE963 soon after. I would recommend running the latest FW release on the downloads page or anything that is offered as auto-update. I don't believe 6.3.1.21 falls into either of these categories right now.
I was told that it was pulled due to failing testing and should have not been posted in the first place. So only use what is seen on NG download page or here in the forums.
If your having problems please post about them and give details and we'll try and help you out.
I left 6.3.1.21 on my RBK963 and my firmware had recently been updated to 6.3.5.8 but I don't know when this update happened. I haven't really been home to observe if anything had broken but my cameras are working which is my main concern right now.
I left 6.3.1.21 on my RBK963 and my firmware had recently been updated to 6.3.5.8 but I don't know when this update happened. I haven't really been home to observe if anything had broken but my cameras are working which is my main concern right now.
I have a question into NG Support about this. Nothing in the download pages for this version, no release notes. Hoping to have an answer shortly.
Since I rebooted the router I can not get the satellites to connect. How do I download the firmware to .85? Do I have to connect the laptop to each satellite?
Didnt try that as they are in different rooms and they are fixed with screw on the shelf. It would be easier to connect a laptop and downgrade. Will this work?
Didnt work either with the cable, the satellites were still showing up as disconnected and no IP. Went into the Orbi APP and was showing 0 satellites, but when clicking on network map their were showing in red and disconnected. However their IP was in the details and I was able to access the IP and downgrade satellite first and then main router
Didnt work either with the cable, the satellites were still showing up as disconnected and no IP. Went into the Orbi APP and was showing 0 satellites, but when clicking on network map their were showing in red and disconnected. However their IP was in the details and I was able to access the IP and downgrade satellite first and then main router
No I connected the router to the satellite via cable and then connected to the satellite IP as in the network map it was still showing as disconnected.
Ok. Glad ethernet worked. It should have. Unless the FW is way off or the RBS are in some bad condition.
Will keep asking about bringing the RBS self web page services back. It was available on the 8 series early on but someone decided to take it away. Would have been nice to have it here.
