NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Bad connection to IOS devices
On every IOS device I see the full strong wifi signal. But when using the internet on these devices it takes a very long time to connect. This is visible with the ios-icon next to the wifi-icon as th...
brasax, for now you can go to this URL (posted by someone else recently) and see which devices are connected to which router/satellite and by 2.4/5 Ghz: http://orbilogin.net/DEV_show_device.htm
Thanks for the link. Why is this not in the interface directly shown?
The link shows only if wireless or ethernet, but not the 2.4/5 Ghz.
I turned the stuff off, but did not help. I will set a channel instead of auto and see how it goes..
I tried the link, but what the heck is Netgear doing? The first time the link shows old data (devices which are switched off). If I click on refresh, the link is changing to http://192.168.1.1/DEV_show_device_basic.htm so I have to change the link again. Reloading the page has no effect at all..
Set a channel and it did not help. I'm in conact with the support to get the things sorted out hopefully. Interestingly they were not aware of any iOS issues at all.. They do not read here I guess..
Hello brasax
It is known that customers are having issues with IOS devices disconnecting with orbi and engineers are working on the issue I just do not have any ETAs on Firmware releases.
DarrenM
Hi DarrenM,
good to know that you are aware of this issue and at least working on it. If you need additional informations like log files, I can provide them.
But there is also a problem with the log-files: I have set that I get every day at 8 am the log-files via mail. But In the most cases the logs are not complete, only 16 hours and not 24hrs as I would expect.. Any ideas?
brasax
