NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Changing Orbi Region
Hi, I have searched for a way to change the region from US to Europe. Here it is: 1) Enable telnet on router and satelite by enabling telnet on web management e.g. 192.168.1.x/debug.htm ...
Thanks for the tip.
I was looking for a way to change my region to NA to have at least a reasonable amount of power on the 5ghz band (my backhaul was at 20dbm leading to very poor backhaul speeds even at 20 feet and 1 wall-the satellite would switch over to 2.4ghz )
This is what worked for me:
a) telnet and verify region ->
artmtd -r region
should return current region
b) change region to NA
artmtd -w region NA
verify new region via (a) above
This alone does not change all the region settings, specifically the radio power as validated by "iwlist txpower" which remained the same even after the region change
I subsequently did a 30/30/30 reset followed by a regular reset
After this, I had to re-setup the device
Post this, iwlist txpower showed me the expected power settings
The backhaul is now 500mbps+ and the 5ghz radio range is significantly improved
Thanks for the info.
By the way, you can also set it to region free (WW).