- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Connect two different Orbi RBR23 sets together
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi everybody,
I've got a question regarding to combine two different sets of Orbi RBR32 together.I have two sets, One with 1 router and 2 satelites and an additional one with 1 router and 1 satelite.
Basically I bought the second set with the assumption to just add the extra satelite and not use the router. But I have also read somewhere the second router can be used as an extra AP as long as you place it far away from the DHCP router and use channel 1 and 11 of both devices.
But the problem is that I can't seem to connect the other satelite to the first system. They do not sync, what ever I try. Not by cable, not by setting them next to each other, not by trying to add them trough orbilogin, nothing.
Is it possible to add a satelite from the same version (RBR23) from another set? If so, how? Thanks for input here!
Solved! Go to Solution.
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@Kingknoest wrote:Basically I bought the second set with the assumption to just add the extra satelite and not use the router. But I have also read somewhere the second router can be used as an extra AP as long as you place it far away from the DHCP router and use channel 1 and 11 of both devices.
But the problem is that I can't seem to connect the other satelite to the first system. They do not sync, what ever I try. Not by cable, not by setting them next to each other, not by trying to add them trough orbilogin, nothing.
Is it possible to add a satelite from the same version (RBR23) from another set? If so, how? Thanks for input here!
Yes, the satellite should connect to the first system. I would do a "Factory Reset" on that new satellite and then use the Orbi web interface "Add a Satellite" menu option. https://www.youtube.com/watch?v=cMw4ePACgc4
The second router can never become an Access Point (AP). It can be connected with an ethernet cable and be used as a separate WiFi network. Thus, the initial plan was correct: the second router is a spare.
All Replies
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@Kingknoest wrote:Basically I bought the second set with the assumption to just add the extra satelite and not use the router. But I have also read somewhere the second router can be used as an extra AP as long as you place it far away from the DHCP router and use channel 1 and 11 of both devices.
But the problem is that I can't seem to connect the other satelite to the first system. They do not sync, what ever I try. Not by cable, not by setting them next to each other, not by trying to add them trough orbilogin, nothing.
Is it possible to add a satelite from the same version (RBR23) from another set? If so, how? Thanks for input here!
Yes, the satellite should connect to the first system. I would do a "Factory Reset" on that new satellite and then use the Orbi web interface "Add a Satellite" menu option. https://www.youtube.com/watch?v=cMw4ePACgc4
The second router can never become an Access Point (AP). It can be connected with an ethernet cable and be used as a separate WiFi network. Thus, the initial plan was correct: the second router is a spare.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Connect two different Orbi RBR23 sets together
Thx a lot, that simple factory reset did the trick! I'll keep the router as backup, as originally intented, or maybe a separate network if needed.
• What is the difference between WiFi 6 and WiFi 7?
• Yes! WiFi 7 is backwards compatible with other Wifi devices? Learn more