Forum Discussion

Star

Oct 04, 2018

Solved

Firmware 2.2.1.210 and connection problems Skybell

Yesterday I manually updated the firmware (2.1.4.16) of my Orbi RBR50 and RBS50 to 2.2.1.210. All devices quickly connected except for my Skybell Trim Plus doorbell. So I reset the router and satelit...

Installation

Troubleshooting

freakievinnie
Oct 10, 2018
Thank you all for your imput/help. It took a lot of time and frustration but my Skybell is online now for almost 2 days.

Luisfo

Aspirant

Oct 11, 2018

Please Help!

I dont know what im doing wrong,
Attached its my info, can you help me with the correct configuration Numbers in my case?? Thanks!

tarxvf

Guide

Oct 11, 2018

Its the IP address in your case, use the ones i have listed below

It will ask for the following:

-Password: This will be your WiFi password
-Keep it at WPA2

-IP Address: (see gateway first) Use the first three numbers from your default gateway and 201 for your 4th number (e.g. if your gateway is 10) Use - 10.0.0.201

-Subnet Mask: 255.0.0.0

-Gateway: Use the number that follows "Default Gateway/Router" for your router/extender that you are using to connect the device: Use - 10.0.0.1

-DNS: 8.8.8.8

cool2562
Star
Oct 11, 2018
If your Default Gateway is 192.168.1.1 use subnet 255.255.255.0 and IP address 192.168.1.201

If your Default Gateway is 10.0.0.1 use subnet 255.0.0.0 and IP address 10.0.0.201

Hope that helps people
FURRYe38
Guru
Oct 11, 2018
Enjoy. :smileywink:

Luisfo wrote:
Finally worked!

Thanks a lot!!!
Luisfo
Aspirant
Oct 11, 2018
Finally worked!

Thanks a lot!!!
cool2562
Star
Oct 11, 2018
Subnet mask would be different if the default gateway is 10.0.0.1

Subnet - 255.0.0.0

Anyone having issues with SkyBell can message me and I can walk you through.