NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Firmware 2.2.1.210 released as of 10/3/18
New firmware is available via the GUI ....
Let's hope for success.
Did anything change regarding the status of the satellite backhaul? Previously I had always "Good" status, now after this update my status is stuck at "Poor" even after reboot. No furniture or anything in the house has been moved in months, now all of a sudden this is an issue.
Have the same issue (though only on one satellite)
If you updated to recent FW v.210, try enabling Daisy Chain. Some have mentioned that this seems to be working in reverse order, enabling means disabled actually. Hoping NG support can have a look at this. So try this out as well.
https://community.netgear.com/t5/Orbi/Firmware-2-2-1-210-and-connection-problems-Skybell/m-p/1649275/highlight/true#M43001Try this as well:
WoodsideDad wrote:
Have the same issue (though only on one satellite)
- I had this too. I had to factory reset to fix it.
Oddly I noticed a few times on my attached devices that it will show my satellites ad being off. Though a refresh shows them back on. It feels like there is quite a few bugs so far. Try a factory reset on the system and setup from scratch?
What is the distance between the router and satellite(s)? 30 feet is recommended in between them to begin with depending upon building materials.
DaytonaZ33 wrote:
Did anything change regarding the status of the satellite backhaul? Previously I had always "Good" status, now after this update my status is stuck at "Poor" even after reboot. No furniture or anything in the house has been moved in months, now all of a sudden this is an issue.
Hmmm, mine have updated and now are wide open....192.168.1.1 requires no login, nowhere to set admin password - if i logout I'm still logged in. Will try factory reset in the morning to avoid alienating the family again tonight.
Did you look under Advanced Tab/Advanced settings/Admin?
Bullyterrier wrote:
Hmmm, mine have updated and now are wide open....192.168.1.1 requires no login, nowhere to set admin password - if i logout I'm still logged in. Will try factory reset in the morning to avoid alienating the family again tonight.
