NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Firmware 2.2.1.210 released as of 10/3/18
New firmware is available via the GUI ....
Let's hope for success.
Ya, thats strange. After you updated FW, did you just apply and continue to use the system? Wondering if a full reset and set up from scratch would clear that issue or not.
JoeCymru wrote:
FURRYe38: Well, the strangeness is a bit compounded so now I have no idea what is going on. I took off daisy chain got poor backhaul again. Put it back on, got good backhaul. However, the attached devices on the UI says both satellites are connected to the router when the daisy chain in on. Off is on, on is off. Check the daisy chain box, after reboot, both satellites connect to router. Take it off, one satellite connects to the other.
I just enabled dasiy chain and everything is working correctly now..My devices are switching between satellites and the 5g devices are being reported correctly in the web interface and mobile app..Before the update I had daisy chain disabled and everthing worked fine, but now i have to enable it for everything to work as expected..