NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Firmware V1.12.0.18 Discussion
This does indeed appear to be based on (identical to?) the last private beta V1.12.0.16 and has been released to the public. Hope it helps!
Guest mode AP isolation finally works 100% over IPv4...
New Features and Enhancements:
- Supports ReadySHARE Printer for Orbi devices that are equipped with a USB port
- Updated the OrbiOS API to v3.14
Bug Fixes:
- Fixes the iOS disconnection issue.
- Fixes the Dropcam disconnection issue.
- Fixes the convergence issue when an Ethernet connected device moves from one Orbi to another.
- Fixes the issue where the Orbi app can’t find the Orbi router if the router is using IPv6 and is in AP mode.
- Fixes the issue where the Orbi app can’t display more than 20 connected devices.
- Fixes the issue where the installation assistant might not display if the device is connected to the Orbi network wirelessly.
- Fixes the issue where the 2.4 GHz backhaul setting is disabled if the fronthaul MU-MIMO and TxBF is disabled.
- Fixes the issue where IPv6 devices on the guest network can access the Orbi router’s web GUI.
- Includes security fixes for the following security vulnerabilities:
PSV-2016-0133, PSV-2017-0607, PSV-2017-0615, PSV-2017-0736, PSV-2017-2190
Download Link:
RBR50 - http://www.downloads.netgear.com/files/GDC/RBK50/RBR50-V1.12.0.18.zip
RBS50 - http://www.downloads.netgear.com/files/GDC/RBK50/RBS50-V1.12.0.18.zip
Like many others, I have the following problem. Firmware auto-updated and I lost the satellite. The satellite shows as a connected device, but does not operate as a satellite. Factory-reset everything and still doesn't work. I should note that after factory-resetting, the satellite does initially install as a satellite, but when I unplug it, to relocate the unit, it reverts back to a connected device.
I have been able to solve the issue (temporarily) by manually reverting the satellite back to 1.11.02.20. I've left the firmware on the router at 1.12.0.18. The problem, of course, is that the satellite only works for a while because it then auto-updates to the new firmware and the pooch is screwed once again.
Question - Is there any way to prevent the satellite from auto-updating the firmware?
WARNING TO SONOS USERS : V1.12.0.18 update resulted in Sonos not being able to connect to Boost that is connected to Orbi router by ethernet. Has anyone else experienced this problem and found a cure? In the meantime, I have manually re-installed V1.11.0.20 and Sonos now works again.
Similar to Replevin, I would like to know if there is any way to prevent the router and satellite from auto-updating?
My Sonos is funtioning good with Orbi, but I am not using the boost.
Loxley wrote:WARNING TO SONOS USERS : V1.12.0.18 update resulted in Sonos not being able to connect to Boost that is connected to Orbi router by ethernet. Has anyone else experienced this problem and found a cure? In the meantime, I have manually re-installed V1.11.0.20 and Sonos now works again.
Similar to Replevin, I would like to know if there is any way to prevent the router and satellite from auto-updating?
Out of curiousity... Why Boost? Sonos doesn't really recommend it anymore. Can't you just use Orbi network?
Stkasm wrote:
Out of curiousity... Why Boost? Sonos doesn't really recommend it anymore. Can't you just use Orbi network?
Ok. I'm curious. Where do you see this recommendation from Sonos? I have used Sonos' proprietary mesh network for years, and it works exceedingly well. (A boost is not actually required, as all speakers can function as a mesh node.)
st_shaw wrote:
Stkasm wrote:
Out of curiousity... Why Boost? Sonos doesn't really recommend it anymore. Can't you just use Orbi network?
Ok. I'm curious. Where do you see this recommendation from Sonos? I have used Sonos' proprietary mesh network for years, and it works exceedingly well. (A boost is not actually required, as all speakers can function as a mesh node.)
Current recommendation is to use home wifi if it provides sufficient coverage:
They do advise to use boost / bridge setup if you have wireless problems, however, in a crowded wi-fi environment, adding extra network on 2.4G range may just make it worse due to interference.
Orbi should provide you more than enough coverage on 2.4G to run Sonos.
PS: I've tried both setups and settled on a unified WiFi network model.
