Have to keep rebooting my RBR50

Just coming back to say that it's now been several days since I implemented the changes mentioned above by JJames24 (replicated below) in a post higher up in this thread.  Since implementing those changes I have not had to reboot my Orbi RBR50 once.  Also, these changes appear to have fixed a minor issue I had that started when I installed the orbi originally, about every third time I used my wireless printer it would say "Can't find printer" and I'd have to pause and restart the print job to get it to go through.  That issue has also not occurred since making the above mentioned changes.

Hopefully this helps other people who are having similar problems, it appears to have helped me.  

1. Login to the router
2. Under Basic ---> Wireless ----> Wireless Network
3. Change 2.4GHz Channel to 6 and 5GHz Channel to 44 ---> Apply
4. Go to Advanced ---> Advanced Settings ---> Wireless Set Up
5. Change CTS/RTS Threshold to 2200; Change Preamble mode to "Long Preamble"; Enable Implicit Beam Forming and Enable Mu Mimo (both check boxes) ---> Apply
6. Uncheck "Enable Daisy Chain Topology" ---> Apply