AmitRI can confirm, we've begun pushing 2.1.3.4 available for auto-upgrade. Feel free to upgrade using mobile app / WebUI.Orbi Product ManagementHowever I check my Orbi it is not showing the update. Mine is still 2.1.2.18

You can find the links to the firmware here in this thread https://community.netgear.com/t5/Orbi/Orbi-MR-2-1-Update-3-23-18/td-p/1533584 Right now the firmware is not on the auto update sever until the engineers agree it is completely ready to be pushed to all systems. DarrenM

If you are experiencing issues yes I suggest a factory reset. DarrenM

Even after selecting for check update? You can manually update as well. Please do a factory reset on both router and satellite(s) then set up from scratch if you upgrade the FW.I recommend using IE11 or FF browsers for this. Be ethernet wired with the router and satellite when doing the update. Update the Satellite first, then router.OrbiMan wrote:AmitRI can confirm, we've begun pushing 2.1.3.4 available for auto-upgrade. Feel free to upgrade using mobile app / WebUI.Orbi Product ManagementHowever I check my Orbi it is not showing the update. Mine is still 2.1.2.18

For some reason, NG does not have v2.1.3.4 listed in the RBK53 product. See http://www.netgear.com/support/product/RBK53.aspx#download

Is 2.1.3.4 in auto update. | NETGEAR Communities

13 Replies

FURRYe38
Guru
Apr 06, 2018
Even after selecting for check update?

You can manually update as well. Please do a factory reset on both router and satellite(s) then set up from scratch if you upgrade the FW.
I recommend using IE11 or FF browsers for this. Be ethernet wired with the router and satellite when doing the update. Update the Satellite first, then router.
OrbiMan wrote:
AmitR
I can confirm, we've begun pushing 2.1.3.4 available for auto-upgrade. Feel free to upgrade using mobile app / WebUI.

Orbi Product Management

However I check my Orbi it is not showing the update. Mine is still 2.1.2.18
- tagteam
  Virtuoso
  Apr 06, 2018
  For some reason, NG does not have v2.1.3.4 listed in the RBK53 product.
  
  See http://www.netgear.com/support/product/RBK53.aspx#download
tagteam
Virtuoso
Apr 06, 2018
OrbiMan wrote:
However I check my Orbi it is not showing the update. Mine is still 2.1.2.18
Mine is not showing either (RBK53) and I have checked in the UI several times with different browsers.

Funny thing is it was showing several days ago and I just figured it would auto-update as per usual. However, they auto-update never did happen and now the UI shows no new firmware version. I'm still on v2.1.2.18, which is fine since I have zero issues with it.
- Retired_Member
  Apr 07, 2018
  i still don't have 2.1.3.4
  - loomis1975
    Luminary
    Apr 07, 2018
    They pulled the latest beta off the auto update list, which since it is a beta, I'm not sure why they put it on there in the first place. Thats also the reason it isn't available via the download page for the various models, its a beta.
    
    I didn't have any real issues with 2.1.2.X, so I waited till 3 of my 4 devices had beta firmware available for them before I tried it out.
    
    My RBS50Y is still on 2.1.2.20, but seems to be working fine with the rest of the things on the latest beta, 2.1.3.X

Retired_Member

Apr 07, 2018

	Model Name	Device Name	Current Version	Status
Router	RBR50	RBR50	V2.0.1.4	No new firmware version available.
Satellite	RBS50	RBS50	V2.0.1.4	No new firmware version available.
Satellite	RBS50	RBS50	V2.0.1.4	No new firmware version available. OrbiMan wrote: AmitR I can confirm, we've begun pushing 2.1.3.4 available for auto-upgrade. Feel free to upgrade using mobile app / WebUI. Orbi Product Management However I check my Orbi it is not showing the update. Mine is still 2.1.2.18

Frank_H
Guide
Apr 07, 2018
Ditto

Forum Discussion

Is 2.1.3.4 in auto update.