Is 2.1.3.4 in auto update.

[OrbiMan]

@AmitR
I can confirm, we've begun pushing 2.1.3.4 available for auto-upgrade. Feel free to upgrade using mobile app / WebUI.



Orbi Product Management

However I check my Orbi it is not showing the update. Mine is still 2.1.2.18

[FURRYe38]

Even after selecting for check update?

You can manually update as well. Please do a factory reset on both router and satellite(s) then set up from scratch if you upgrade the FW.

I recommend using IE11 or FF browsers for this. Be ethernet wired with the router and satellite when doing the update. Update the Satellite first, then router.

---

@OrbiMan wrote:
@AmitR
I can confirm, we've begun pushing 2.1.3.4 available for auto-upgrade. Feel free to upgrade using mobile app / WebUI.



Orbi Product Management

However I check my Orbi it is not showing the update. Mine is still 2.1.2.18

---

[tagteam]

For some reason, NG does not have v2.1.3.4 listed in the RBK53 product.

See http://www.netgear.com/support/product/RBK53.aspx#download

[tagteam]

---

@OrbiMan wrote:
However I check my Orbi it is not showing the update. Mine is still 2.1.2.18

---

Mine is not showing either (RBK53) and I have checked in the UI several times with different browsers. 

Funny thing is it was showing several days ago and I just figured it would auto-update as per usual. However, they auto-update never did happen and now the UI shows no new firmware version. I'm still on v2.1.2.18, which is fine since I have zero issues with it.

[Retired_Member]

i still don't have 2.1.3.4

[loomis1975]

They pulled the latest beta off the auto update list, which since it is a beta, I'm not sure why they put it on there in the first place.  Thats also the reason it isn't available via the download page for the various models, its a beta.

I didn't have any real issues with 2.1.2.X, so I waited till 3 of my 4 devices had beta firmware available for them before I tried it out.

My RBS50Y is still on 2.1.2.20, but seems to be working fine with the rest of the things on the latest beta, 2.1.3.X

[tagteam]

---

@loomis1975 wrote:

They pulled the latest beta off the auto update list, which since it is a beta, I'm not sure why they put it on there in the first place.  Thats also the reason it isn't available via the download page for the various models, its a beta.

---

Yeah, my point was that it is just awfully strange that v2.1.3.4 appears on the download page for RBK50 but not for RBK53 nor RBR50. The only reasonable presumption is an oversight.

[loomis1975]

---

@tagteam wrote:

---

@loomis1975 wrote:

They pulled the latest beta off the auto update list, which since it is a beta, I'm not sure why they put it on there in the first place.  Thats also the reason it isn't available via the download page for the various models, its a beta.

---

Yeah, my point was that it is just awfully strange that v2.1.3.4 appears on the download page for RBK50 but not for RBK53 nor RBR50. The only reasonable presumption is an oversight.

---

I think you are right.  When they pulled 2.1.3.4 off auto update, they should have pulled it off the RBK50 product page as well.

[Retired_Member]

	Model Name	Device Name	Current Version	Status
Router	RBR50	RBR50	V2.0.1.4	No new firmware version available.
Satellite	RBS50	RBS50	V2.0.1.4	No new firmware version available.
Satellite	RBS50	RBS50	V2.0.1.4	No new firmware version available. @OrbiMan wrote: @AmitR I can confirm, we've begun pushing 2.1.3.4 available for auto-upgrade. Feel free to upgrade using mobile app / WebUI. Orbi Product Management However I check my Orbi it is not showing the update. Mine is still 2.1.2.18

[Frank_H]

Ditto

[DarrenM]

You can find the links to the firmware here in this thread

https://community.netgear.com/t5/Orbi/Orbi-MR-2-1-Update-3-23-18/td-p/1533584

Right now the firmware is not on the auto update sever until the engineers agree it is completely ready to be pushed to all systems.

DarrenM

[Retired_Member]

---

@DarrenM wrote:

You can find the links to the firmware here in this thread

https://community.netgear.com/t5/Orbi/Orbi-MR-2-1-Update-3-23-18/td-p/1533584

Right now the firmware is not on the auto update sever until the engineers agree it is completely ready to be pushed to all systems.

DarrenM

---

Does Netgear recommend a factory reset after a auto-update to the new FW?

[DarrenM]

If you are experiencing issues yes I suggest a factory reset.

DarrenM

[Retired_Member]

---

@DarrenM wrote:

If you are experiencing issues yes I suggest a factory reset.

DarrenM

---

thanks.....so when is 2.1.3.4 in auto update.???