This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
After a couple of year of problemless use I have now ended up with a solid purple ring on my router and the satelites. I have one computer connect with a fixed cable to the Orbi router and this computer gets internet access. Over wifi I can barely connect to the system and I once I succeed in connecting to the wifi I can not access my network settings through the Orbi App, it can not detect the products. Wifi units have no internet access. I have rebooted the system a couple of times with the same result everytime - a solid magenta ring on the device and no internet access. Since my computer that is directly connected to the router has internet I know the problem is not with my ISP.
I had access to an extra router, did a factory reset on it and my old satelites, and then set everything up again using my old network details. Now my network works again. Not sure if I had a hardware fault, but that would be my guess.
Yes - I have done the 1 min shut off of both the fibermodem and the Orbi router as well as the satelites.
When it comes to firmware I can not check which version I have since I can not connect to the Orbi units with the app. I have not preformed any update over the last 6 months, but I do not know if any automatic updates could have happened since.
My modem that is connceted to the fibre is a Inteno Broadband Technoloy AB, model name XG6846
To find the FW version, please user a PC or laptop and connect to the RBRs web page at 192.168.1.1 to find the version.
Also your modem may have a built in router. This would be a double NAT (two router) condition which isn't recommended. https://kb.netgear.com/30186/What-is-Double-NAT https://kb.netgear.com/30187/How-to-fix-issues-with-Double-NAT Couple of options, 1. Configure the modem for transparent bridge or modem only mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
Also have the ISP check signal and services up to the modem. The router is dependent upon having a good signal from the modem.
I had access to an extra router, did a factory reset on it and my old satelites, and then set everything up again using my old network details. Now my network works again. Not sure if I had a hardware fault, but that would be my guess.
