- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Re: Orbi RBR50 2.7.0.70 is "out"
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Orbi RBR50 2.7.0.70 is "out"
Heard reports that this was pushed to some users.
It is available at the usual links.
Like 2.5.2.4 there are no release notes.
Orbi RBR50 support site still claims 2.5.1.16 as the official version.
Use at your own risk.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
Haven't used 2.7.0.70 myself either, but there is also some discussion of this new firmware version and support for new NETEGAR Smart Parental Controls (SPC) in this thread: https://community.netgear.com/t5/Orbi/Circle-quot-Something-Went-Wrong-quot-on-new-RBR50-install/m-p...
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
For users, this are not official user links either. Only used by the Orbi system. Users should be aware. IF it's not on NG official download site, then it's not officially released. Use at your own risk.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
2.7.0.70 appeared as an update on my IOS Orbi app this morning. As others have mentioned I found nothing about this firmware release on Netgear's website.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
@Tbsteph wrote:2.7.0.70 appeared as an update on my IOS Orbi app this morning. As others have mentioned I found nothing about this firmware release on Netgear's website.
Looking at the filename of the zip files, this firmware is meant for RBK53 V2 model.
So they are meant for RBR50V2 router and RBS50V2 Satellite.
It may cause issues if trying to install on a V1 version.
However the official downlaod site still shows 2.5.1.16
For those that may be confused about what version they have, the V1 has USB ports, the V2 does NOT.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
@Mstrbig wrote:
Looking at the filename of the zip files, this firmware is meant for RBK53 V2 model.So they are meant for RBR50V2 router and RBS50V2 Satellite.
ALL of the RBR50 firmware files that I have downloaded begin with "RBR50-V2" and installed just fine on my "V1" router.
I think the "V" stands for "firmware version"
I continue to be amazed that individuals are able to release software revisions with pretty comprehensive "release notes", but Netgear cannot manage it. Both the V1 and V2 Orbi support pages continue to state that V2.5.1.16 is the most recent firmware, even though later versions appear on Netgear download sites and numerous users have posted about being notified of (or automatically getting) newer firmware.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
@CrimpOn wrote:
@Mstrbig wrote:
Looking at the filename of the zip files, this firmware is meant for RBK53 V2 model.So they are meant for RBR50V2 router and RBS50V2 Satellite.
ALL of the RBR50 firmware files that I have downloaded begin with "RBR50-V2" and installed just fine on my "V1" router.
I think the "V" stands for "firmware version"
Interesting I just looked at all my files and find no mention of RBR50-V2 on any of my files.
However when I look at my archived files for the V2 version, they all start with RBK53-V2, RBR50-V2, RBS50-V2
WHAT AMAZES ME MORE IS:
No one from Netgear EVER chimes in to explain why many owners of Orbi RBR50 and RBS50 units are getting different firmware versions? This affects dealers like me, when customers call and ask about it and we have no answers, It makes us look bad.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
Just putting this out there...
I downloaded this firmware and I had to roll back to 2.5.2.4.
My devices continually lost connection and both satellites would repeatedly lose connection to the base.
This firmware is **NOT** production ready. I wouldn't recommend downloading and installing this.
2.5.2.4 is stable.. I WOULD recommend upgrading to 2.5.2.4 if you haven't already.
Don't waste your time with this 2.7.0.70.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
@Reddking wrote:Just putting this out there...
I downloaded this firmware and I had to roll back to 2.5.2.4.
My devices continually lost connection and both satellites would repeatedly lose connection to the base.
This firmware is **NOT** production ready. I wouldn't recommend downloading and installing this.
2.5.2.4 is stable.. I WOULD recommend upgrading to 2.5.2.4 if you haven't already.
Don't waste your time with this 2.7.0.70.
2.5.2.4 is NOWHERE to be downloaded. I find it odd that Netgear keeps pushing various versions to the RBR and RBS50 devices. It has to either be a beta program or only people who forced and update gets a newer update. I wish Netgear would stop being Silent.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
@CrimpOn wrote:
ALL of the RBR50 firmware files that I have downloaded begin with "RBR50-V2" and installed just fine on my "V1" router.I think the "V" stands for "firmware version"
That is exactly correct. If you look at the past firmware versions, all of the "1 series" begin with "V1".
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
@tagteam wrote:
@CrimpOn wrote:
ALL of the RBR50 firmware files that I have downloaded begin with "RBR50-V2" and installed just fine on my "V1" router.I think the "V" stands for "firmware version"That is exactly correct. If you look at the past firmware versions, all of the "1 series" begin with "V1".
This does not appear to be correct. The Netgear support page for the V1 Orbi shows firmware versions from V1.1.0.16 (Initial Release) through V2.5.1.16 (current). The V2 Orbi (no USB) was initially released with firmware 2.3.1.44, so the support page does not show "previous versions". My original V1 Orbi (USB) came with V1.1.0.16 and has been updated as new releases come out until it is now at V2.5.1.16.
I downloaded the 2.3.1.44 zip file for V1 Orbi and for V2 Orbi. A binary file comparison (Windows FC command) shows they are identical.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
@CrimpOn wrote:This does not appear to be correct. The Netgear support page for the V1 Orbi shows firmware versions from V1.1.0.16 (Initial Release) through V2.5.1.16 (current). The V2 Orbi (no USB) was initially released with firmware 2.3.1.44, so the support page does not show "previous versions". My original V1 Orbi (USB) came with V1.1.0.16 and has been updated as new releases come out until it is now at V2.5.1.16.
I downloaded the 2.3.1.44 zip file for V1 Orbi and for V2 Orbi. A binary file comparison (Windows FC command) shows they are identical.
@CrimpOn, Very interesting. If the binaries are the same, what part of the firmware supports the USB port programming, or is it just ignored on the Orbi V2 version?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
@Mstrbig wrote:@CrimpOn, Very interesting. If the binaries are the same, what part of the firmware supports the USB port programming, or is it just ignored on the Orbi V2 version?
nvram show on my V1 Orbi produces a bunch of parameters that mention usb:
root@RBR50:/# nvram show | grep usb
usb_enableHTTP=0
dgc_func_have_usb=1
usb_deviceName=readyshare
usb_enableFvia=1
usb_enableHvia=1
usb_enableUSB=0
failover_usb_proto=3g
usb_HTTP_via_port=443
usbDeviceName=/mnt/sda1
usb_enableFTP=1
usb_workGroup=Workgroup
usb_FTP_via_port=21
usb_enableNet=0
I do not have a V2 Orbi to test whether any of these parameters are different on the V2 model.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
@CrimpOn wrote:
@tagteam wrote:
@CrimpOn wrote:
ALL of the RBR50 firmware files that I have downloaded begin with "RBR50-V2" and installed just fine on my "V1" router.I think the "V" stands for "firmware version"That is exactly correct. If you look at the past firmware versions, all of the "1 series" begin with "V1".
This does not appear to be correct. The Netgear support page for the V1 Orbi shows firmware versions from V1.1.0.16 (Initial Release) through V2.5.1.16 (current).
I'm not sure we're on the same page. What I meant was all of the firmware versions that being with a "1" (e.g., Version 1.4.0.18) have "V1" in their filenames. I'm 100% certain of that because I've downloaded and unzipped most of them.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
The original RBR50 and RBS50, it was never called RBR50 V1, came out with a USB 2 port. This was NOT a working port. The original documentation stated it would be a furture update. It was never made to work... The RBR50 V2 and RBS50 V2 then came out with no USB port. Hence, I'm guessing, the download files for the RBR50 and RBR50 V2 are identical. No working USB on either. Same with satellites.
File names.. It is unfortunate that the router and satellite that came out later were called V2, as people are confusing the file name eg. V2.7.0.70 to mean this goes with V2 Router etc.
The original file names way back did start with V1.2.4.8 (made that no. up) but as they progressed as any update does it eventually changed to V2. etc.
So summary V2. file, is for RBR50 and in this case RBR50 V2.
Updates: I have the RBR50 and RBS50 x 2.
Mine auto updated to the V2.5.2.4, then within the last few days showed update available ( as against auto update) V2.7.0.70. I selected update. All went well and system works fine. However the Orbi app shows incorrect info and the web UI also shows wrong info.
I finally took the plunge and rolled them back to the official .16 firmware. The Orbi app and web UI now show correct info.
However and here's the kick, update available has now just shown up on the app and web ui for V2.7.0.70.. I will leave it there for a while to see what others find....
Cheers
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
By the way, the USB port does "work". It just does not do what people are interested in (printer or USB hard drive). I use it to save WAN/LAN traffic to a USB stick for Wireshark analysis and Voxel uses it to keep configuration files over resets. He may even have other functions working on the USB port.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
I thought it best not to mention that, as u say, it doesn't work for what most would try to use it for.
Cheers
Anyone else showing update to V2.7.0.70 available from V....16 and has anyone updated
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
Two days with V2.7.0.70 and everything is fine and stable. I have the first RBK53 that cama out at Costco.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
Orib users have the choice to not update and avoid the Orbi app notification if they choose too.
Users are encouraged to find most current available official versions of FW on NG download site as well:
https://www.netgear.com/support/
@Richys wrote:
Lets try and clear a few things up. The messages under this V2.7.0.70 and all the messages under V2.5.2.4 all seem to nearly be correct, but muddle the correct and incorrect bits together.
The original RBR50 and RBS50, it was never called RBR50 V1, came out with a USB 2 port. This was NOT a working port. The original documentation stated it would be a furture update. It was never made to work... The RBR50 V2 and RBS50 V2 then came out with no USB port. Hence, I'm guessing, the download files for the RBR50 and RBR50 V2 are identical. No working USB on either. Same with satellites.
File names.. It is unfortunate that the router and satellite that came out later were called V2, as people are confusing the file name eg. V2.7.0.70 to mean this goes with V2 Router etc.
The original file names way back did start with V1.2.4.8 (made that no. up) but as they progressed as any update does it eventually changed to V2. etc.
So summary V2. file, is for RBR50 and in this case RBR50 V2.
Updates: I have the RBR50 and RBS50 x 2.
Mine auto updated to the V2.5.2.4, then within the last few days showed update available ( as against auto update) V2.7.0.70. I selected update. All went well and system works fine. However the Orbi app shows incorrect info and the web UI also shows wrong info.
I finally took the plunge and rolled them back to the official .16 firmware. The Orbi app and web UI now show correct info.
However and here's the kick, update available has now just shown up on the app and web ui for V2.7.0.70.. I will leave it there for a while to see what others find....
Cheers
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
@FURRYe38 wrote:Orib users have the choice to not update and avoid the Orbi app notification if they choose too.
Users are encouraged to find most current available official versions of FW on NG download site as well:
Good advice because there are so many users, who have updated to newer firmware, to find they are now having various issues like slow speeds, devices not connecting or showing up in the GUI, etc. My personal RBK53 system has been 100% rock solid on 2.5.1.16. I've been tempted to update, because I generally go with the latest available firmware. However, I'm staying with 2.5.1.16 until a newer version is available on the official download site (https://www.netgear.com/support/download/).
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
Same here, v16 seems the best version of FW to date. Minus maybe some device icon issues. FW is pretty good. I do wish NG would first let users beta test new versions of FW before pushing out thru the Orbi app. Let some of us smoke test them.
@Mstrbig wrote:
@FURRYe38 wrote:Orib users have the choice to not update and avoid the Orbi app notification if they choose too.
Users are encouraged to find most current available official versions of FW on NG download site as well:
Good advice because there are so many users, who have updated to newer firmware, to find they are now having various issues like slow speeds, devices not connecting or showing up in the GUI, etc. My personal RBK53 system has been 100% rock solid on 2.5.1.16. I've been tempted to update, because I generally go with the latest available firmware. However, I'm staying with 2.5.1.16 until a newer version is available on the official download site (https://www.netgear.com/support/download/).
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
Have you by chance looked at that.
Regards
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
Mine is showing each connection as it should (wired,2.4G,5G) on both app (iOS) and GUI.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Orbi RBR50 2.7.0.70 is "out"
I suspect that V....16 was found to have security issues and they have been trying to fix it since. Is that thought a bit off course??
Thanks also to those with the extra info re USB port.
• What is the difference between WiFi 6 and WiFi 7?
• Yes! WiFi 7 is backwards compatible with other Wifi devices? Learn more