× NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
× Introducing the new Orbi 770 Series Mesh System. To learn more click here.
Orbi WiFi 7 RBE973
Reply

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

Wait, never mind. I'm only experiencing this on my phone - iPad seems to work perfectly. Not sure what's going on.

Message 51 of 122
DavidJZU
Guide

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

Just confirming what other posters have said here.

 

I have about 7 Leviton Decora switches and 3 iHome iSS50 sensors all on Homekit with my Orbi.

Firmware 2.1.3.4 was nothing but trouble ... accessories were intermittently non-responsive.   Sometimes restarting the home app would fix it, other times recycling WIFI on my iPhone or iPad would help.

 

 Rolled back to  firmware 2.1.2.18 and its now totally stable. Amazing.

 

Also, I can also confirm what others have said re: firmware 2.1.4.10.  It does not address this problem. 

Model: RBK50| Orbi AC3000 High-Performance Tri-Band WiFi System
Message 52 of 122
Bill____
Apprentice

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

Yesterday, as mentioned, I upgraded to firmware 2.1.4.10 to see if the issue had been fixed.  It had not.  So I downgraded to version 2.1.2.18 and all worked well.  Howver, this morning, I noticed some troubles.  Upon checking, I see that my system automatically upgraded to 2.1.4.10 automatically,  It appears that they have decided to push out this software automatically (which I haven't seen them really do previously).  This is somewhat disturbing since this issue is apparently being dealt with by tier 3 support.

-they have not provided any update.

-they did not pull the firmware with the problem.

-they did not update the release notes or any other information I could see to alert people of the problem so they could avoid the grief.

-they automatically deployed yet a newer version of firmware, which still contains the problem.  

-no mention in the release notes.

Message 53 of 122

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

Honestly, if they took 2.1.2.18 and added the option to disable automatic updates but left everything else untouched, I would be fine with that. At this point, I couldn't care less about fancy new features in new updates; I just want something that's stable and that works. 

Message 54 of 122
OutGolfn
Guide

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

I updated to V 2.1.4.10 yesterday and power cycled all my smart plugs. This update has helped some with my iHome smart plugs but the HomeKit issue definitely needs to be fully looked into by Netgear.

It’s definitely more stable than V 2.1.3.4 in my use case.
Message 55 of 122
Bill____
Apprentice

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

I cycled my iDevices but it wasn't working well...so I am back to the older version.  I have hopefully blocked updates by going into the NVRAM settings using telnet.  Time will tell...

Message 56 of 122
OutGolfn
Guide

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

Looks like I spoke too soon. I am now getting “No Response” from all my Homekit devices. It’s random and seems to affect all.

It got worse throughout today into tonight.
Message 57 of 122
DavidJZU
Guide

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

Just a status update ...

 

3 days after rolling firmware back to 2.1.2.18, Homekit has been solid and stable.  All devices have been behaving themselves.

 

I've followed the advice given here to disable auto-update in nvram.  Seems to be working.

 

 

Message 58 of 122
Bill____
Apprentice

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

I think I will leave the auto update off, even if they do fix this problem.  

Message 59 of 122

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

Hopefully keeping auto-update off actually works. I disabled auto-update to prevent updating from 2.0.1.4 to 2.1.3.4; it worked, but then when 2.1.4.10 came out it auto-updated to that.

Message 60 of 122
eljarviso
Luminary

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

The NVRAM setting resets after a reboot of the device.  I ended up putting my asus router back in and running the orbi in AP mode.  I then put in firewall rules to block the download servers netgear uses to push out updates.

Message 61 of 122
Bill____
Apprentice

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

Mine upgraded too.

My pleas to get it set so it won't upgrade have fallen upon deaf ears so far.

The support call is not really progressing at all.

I have a lot invested in the system and it worked in version 2.1.2.18 - if I could only keep it there until this craziness stops.

 

I am going to have to find some solution on my own, I hope I don't have to buy a competitor product.

 

Pretty disappointing.

 

Nice to see the complete lack of attention from the moderators, even though one of them was messaged at the start of this...

Message 62 of 122
eljarviso
Luminary

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

I’ve started looking around for a different solution as well. ASUS Lyra looks like it might be half decent. The Linksys Velop is a little too expensive.
Message 63 of 122

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

I’d love to be able to just buy a different system, but I don’t know if any other solution would get the speeds that the Orbi is able to do. I have the 400Mbps internet tier through Spectrum, and the Orbi might be the only system that’s able to give me full speeds throughout my house.
Message 64 of 122
Bill____
Apprentice

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

 Well, I have three brands of homekit devices connected.   iDevices switches a Philipes HUE system, and a couple of Elgato Eve systems.

 

I remove all of the iDevices components.  Now, the system appears stable....so it appears to be, for me, the iDevices switches having some commotion on the network which also affected other things.

 

I seem to recall some other posters having trouble who possibly didn't have iDevices, but have other things that I don't have.

 

Assuming Elgato and Philips devices are okay, is there any chance of someone having troubles removing a brand of components from the homekit in order to see the effect?  If we can find a list or category of items having trouble, thalt might be helpful.

 

 

Message 65 of 122
eljarviso
Luminary

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

I removed my iDevices plug and problem still exists. The other device I have is a raspberry pi running Homebridge which links my non-HomeKit devices to HomeKit (nest, sonos, harmony, and smartthings)
Message 66 of 122
john_rowe
Guide

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

I don’t have any iDevices devices and I saw the issue with 2.1.3.4.

 

Reverting the Orbi firmware fixes it. That makes me fairly sure it’s the Netgear product causing it.

 

Every Orbi firmware has had one or more showstopper bugs - I really can’t wait to replace these things.

Message 67 of 122
Bill____
Apprentice

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

their support was trying to replicate the problem with Philips Hue, and of course nothing came up, so I think they need to be able to find two, three, or four things that we know they are having problems with so it can be figured out..

I'd guess Raspberry PI, iDevices switches...... 

 

Thanks both people for the updates.

Message 68 of 122
MattEyraud
Tutor

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

I have noticed that all the devices that are communicating via WiFi are impacted. At least in my setup. So Netatmo Presence, LIFX bulbs, iDevices. So it can’t be all those different brands all the sudden having issues. It has to come from Orbi.
Especially knowing that it used to work before their terrible updates ...
Message 69 of 122
MattEyraud
Tutor

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

And I forgot to mention ecobee thermostats. They’re using WiFi and they have issues with the new firmware updates.
Message 70 of 122
eljarviso
Luminary

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

iHome Devices are also causing issues. Bluetooth devices connected to AppleTV seem OK.
Message 71 of 122
eljarviso
Luminary

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

The raspberry pi running HomeBridge is connected via Ethernet which wireless talks to my AppleTV running as a bridge.
Message 72 of 122
john_rowe
Guide

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

I have Nanoleaf, Hue, LIFX, and VOCOlinc WiFi HomeKit devices and they’re all misbehaving with 2.1.3.4. My Bluetooth August, First Alert and Eve devices have been fine the whole time.

 

Reverting to the prior firmware fixes the WiFi devices.

 

I’m surprised that Netgear haven’t got in touch with the folks having problems. If Netgear can’t reproduce it, the next step seems like contacting the folks that can.

Message 73 of 122
usahale
Star

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.

KooGeek outlet devices. Noticed before shutting it down that Orbi could handle 2 of them. As soon as the 3rd one was added, inconsistency. 

Message 74 of 122

Re: Orbi RBS/RBR 50 Version 2.1.3.4 and Apple homekit iDevices and Philips Hue problems.


@eljarviso wrote:

The NVRAM setting resets after a reboot of the device.  I ended up putting my asus router back in and running the orbi in AP mode.  I then put in firewall rules to block the download servers netgear uses to push out updates.


I feel like mine must have rebooted since I installed the beta, but I like the idea of really walling it off from Netgear. What servers are you blocking?

Message 75 of 122
Top Contributors
Discussion stats
Announcements

Orbi 770 Series