Orbi WiFi System (RBK30)

[Zeegs]

Why does my wifi extender regularly go “Magenta”? Every few days I have to reset it by powering off. What causes it?

[FURRYe38]

Possible interferences or placement configuration could be a cause.

What Firmware is currently loaded?
What is the Mfr and model# of the ISP modem the NG router is connected too?
Is the Orbi system operating in Router or AP mode?

What is the size of your home? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet is recommended in between them to begin with depending upon building materials when wirelessly connected.

What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?

Try enabling Beamforming and MIMO(MIMO may or maynot be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings

Try disabling the following and see:
Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Save settings and reboot the router and satellite(s).

[Zeegs]

I use an orbi RBR50 as the base router/AP. Have not touched the firmware since delivery. The satellite is about 20 feet from the router.