NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
OrbiOS 2.1.4.10 kills Internet access if you use Ethernet back haul
I'd been happily using the RBK50 Orbi AC3000 single satellite system since June of 2017 and started using ethernet back haul succesfully around October 2017. Typically 8-16 connections at any given ...
I updated my firmware to 2.2.1.210 today and it solved the ethernet back haul taking the internet connection down and eliminated a couple of other oddities that I was experiencing.
Rather than disabling daisy chaining entirely, I went in to the wired backhaul satellite and enabled STP (spanning tree protocol). You can search my other post for instructions. This has stabilized my network for now until Netgear puts out a fix. I do wonder if STP is one of the internal settings that gets changed when daisy chaining is toggled on and off. The only problem with STP is that it is not persistent - in other words, if the satellite loses power the. STP gets reset.
Daisy chain is only needed if two or more Satellites are in used and if the user has them placed in a chain so they are able to use the daisy chain feature. So if theres only one satellite, Dasiy Chain isn't really needed as is easier to juts disable the check mark and save settings for the average home user.
Zdman wrote:
Rather than disabling daisy chaining entirely, I went in to the wired backhaul satellite and enabled STP (spanning tree protocol). You can search my other post for instructions. This has stabilized my network for now until Netgear puts out a fix. I do wonder if STP is one of the internal settings that gets changed when daisy chaining is toggled on and off. The only problem with STP is that it is not persistent - in other words, if the satellite loses power the. STP gets reset.