NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Ring Doorbell 2 and Orbi
Problem: Ring Doorbell 2, Liveview shows black screen or some other error. Solution: Uncheck Enable 20/40 MHz Coexistence. Storyline: I recently bought the Ring Doorbell 2 and spent hours and d...
I too had problems with activating Ring 2 Live View (blank screen or just reverted to previous menu), had tried other solutions with either temporary on no improvement. Today I tried disabling (unchecking) Enable 20/40 Mhz Coexistence and it immediately fixed the problem, hopefully permanently. If this changes, I'll report. Thanks, Orbi Star for your help.
Thanks for letting us know. Hope this helps others.
Cicloforza wrote:
I too had problems with activating Ring 2 Live View (blank screen or just reverted to previous menu), had tried other solutions with either temporary on no improvement. Today I tried disabling (unchecking) Enable 20/40 Mhz Coexistence and it immediately fixed the problem, hopefully permanently. If this changes, I'll report. Thanks, Orbi Star for your help.
Grrrrrr....after changing the Enable 20/40 Mhz Coexistence setting on Orbi about a week ago with good results, the same issue (i.e., Live View takes multiple activations before starting) is now back. Anyone had luck with adding Ring Chime or Ring Chime Pro with resolving this problem?
Yeah, it stopped working for me as well after a day or so. I think it was temporarily fixed because of the router restarting after disabling 20/40 and not be cause of disabling 20/40.
I have a ring doorbell pro (wired), two spotlight cam mounts (wired), two original ring doorbell (battery powered), and one spotlight cam battery (battery powered).
I've noticed that the wired devices are fine but the battery powered devices have issues. Not sure if that's the issue or if it's just coincidence. Perhaps Orbi doesn't like the way the battery powered devices communicate with it.
Cicloforza wrote:
Grrrrrr....after changing the Enable 20/40 Mhz Coexistence setting on Orbi about a week ago with good results, the same issue (i.e., Live View takes multiple activations before starting) is now back. Anyone had luck with adding Ring Chime or Ring Chime Pro with resolving this problem?
