Search the Community
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
100,000 results
Sorted by:
‎2024-09-29
12:58 PM
3 Kudos
Hello My canvas is not coming online, I am connected to the network, however upon checking on the computer is says status offline. The app on the phone will not sync. I makes the connection...
Show results in replies (8)
-
Hello Meural Community, We are aware of the issue with the Meural server that is causing the Can...
-
I don’t have the model in hands now, but I have always had it working on that router no problem. I ...
-
That’s how I feel too. I feel like they blocked us and they are making us buy extended warranty to ...
-
Did you try factory resetting the Canvas? Or deleting the network and reconnecting it?
-
Doesn’t it suck? I’ve tried again yesterday with hopes , no luck, I hope Netgear looks at this foru...
-
what modem/gateway do you have? What router is the canvas connected to? Does the ca...
-
Hello Meural Community, Welcome to the NETGEAR Community! I understand that y...
-
Feel free to post wherever. I did PM a mod to see if it'd help but didn't hear back. The more atten...
‎2024-06-15
10:00 AM
I have an Orbi Mesh system RBR750 with two satellites. In the orbi app the are red in the device manager. There RBR750's firmware is current but the two satellites have dashes where the firmwar...
Show results in replies (8)
-
There we go. Yay. I'd disable the Auto Update feature to be sure the RBR doesn't get update...
-
I downloaded the v4 software. rbr and rbs. #1 says to select the box next to the satellite name= t...
-
While disconnected (wireless to the primary Orbi router) there can't be a magic connection establis...
-
Factory reset the one RBS thats not connecting and don't do anything for about 5 minutes. With a et...
-
Nothing has been updated. The updates are sitting my download folder. does it matter that I am on ...
-
After downloading firmware and unpacking the *.chk file from the *.zip file: Connect to the web...
-
Well after almost 24 hours working with volunteers here, I now have ZERO satellites in my network w...
-
Okay you guys….This makes more sense…… BUT…. Since i had no idea something like this was even possi...
‎2024-07-28
03:49 PM
I've been dealing with this for a few months and have finally got sick of WiFi only gaming... I am able to connect Xbox to the router via WiFi, but not via ethernet. Has anyone been ab...
Show results in replies (9)
-
To close the loop on this one... I did not find a solution to getting the Netgear router work...
-
Looks like standard nokia ONT. A couple things to try. When its connected to the router v...
-
@FURRYe38 Question, on the RAX router under the Advanced Tab/Internet section box, d...
-
Ok. Internet Port should be a public IP address then. I'd confirm with the ISP that the ONT...
-
@FURRYe38 when Metronet installed I wasn't given any access to configure the Modem. I g...
-
Look at the metronet modem and get a model number. Xbox/playstations don't like double nat'...
-
Also something to test as well, under Advanced Tab/Setup/WAN Setup, set the NAT Filter to OPEN. If ...
-
Here's a pic of it. I don't have time to dismount it from the wall but can do it later if you...
-
One other strange thing that I noticed is that the Xbox device does not populate in my "Wired" Devi...
‎2024-09-18
03:57 AM
Hi, I've got two old Readynas ultra 2's which I am replacing with 2 new Synology DS224's mainly due to age and the declining support. In order to migrate the data I want to run some Rsynch r...
Show results in replies (9)
-
Note I instructed you to log in as root with the NAS admin password.
-
Ahaaaa yes I didn't read it properly sorry. Obviously I couldn't see the wood for the trees. In fa...
-
@beaumonr wrote: --------------------------------------------------------------- Have you...
-
@beaumonr wrote: I've got two old Readynas ultra 2's Are you running 4.2.x f...
-
Hi, I've checked the Rsynch config on the Synology, edited the Rsynch account and th...
-
hi, yes thanks I'm aware of that, but tried all manner of permutations just in case. I have managed...
-
@beaumonr wrote: When I create the back up job on the Readynas, using the Synology...
-
Do make sure you've set rsync access to read/write and that the Synology is included in the allowed...
-
Hi, I've given up on the rsync, so switched to SMB and after faffing around with settings ...
‎2024-08-22
11:14 PM
1 Kudo
I recently upgraded my modem and router so I could add more devices and get higher speeds. I purchased the Netgear Nighthawk CM2000 cable modem and the Nighthawk RS700S Wifi 7 router. According to th...
Show results in replies (7)
-
What speeds are seen if you enabled Smart connect, leaving MIMO and OFDMA enabled? MIMO I b...
-
Thanks! I found that of my four client devices, only my iPad Pro M2 has the capability to receive h...
-
This website from Apple lists the WiFi capability for different Apple devices. https://support.ap...
-
Thank you for your reply and input. After more checking, I was able to determine that some of my de...
-
@stanfrench wrote: 1. Why are the download speeds so different when measured via the Nightha...
-
Thank you for your feedback and advice. I was able to determine that of my four devices, only one h...
-
What brand and model ethernet adapter are you using? What speeds does it support. Tried d...
‎2024-07-21
04:59 AM
I tried to set up the LAN port aggregation between my CM3000 modem and RS700S router. I connected the two aggregation ports of the CM3000 to the aggregation ports 1 and 2 on my RS700S router using CA...
Show results in replies (9)
-
1. Why are you using lan port aggregation? Use the 10 gig wan port on the router and the 2.5gig por...
-
Glad you got it working. Be sure to save off a back up configuration to file for safe keeping. Save...
-
In my previous reply, for some reason, I thought you already had a 2.5gig switch. If you are lookin...
-
No. There has to be router in between the CM3000 and the switch. If you enable LAG on the C...
-
This RS700 is fast. Can't wait to get fiber optic ISP in September.
-
I got the MS305 unmanaged switch and connected it as you said from the 10G LAN port to the switch a...
-
My problem with Ethernet Aggregation Port Status is solved. Was not getting a signal from xfi...
-
In my RS700S router, the Ethernet Settings, It says the Ethernet Prot Aggregation Status is : ...
-
Glad you got it working. Be sure to save off a back up configuration to file for safe keeping. Save...
‎2024-07-24
09:19 AM
I have a ReadyNAS 428 with two RAID5 Flex-RAID volumes. One volume experienced a disk failure and the volume was changed to read-only. I replaced the disk, formatted it, added it to the volume, and w...
Show results in replies (9)
-
I had that happen to me. In my case, I knew it was because my EDA500 came unplugged during a ...
-
My concern, based on reading another "accepted solution", was that I would have to reset the entire...
-
Thanks for ripping off the band aid. It seems I am f*cked then, as in having to spend a lot of time...
-
I checked the log and it states clearly that the error happened due to no space left and that's wha...
-
I am adding to this discussion because I am looking for an answer to the exact same question. &nbs...
-
I don't have much experience here, and I couldn't find anything I could do (even via SSH) to put th...
-
@tijgert wrote: If it would just let me wipe those emergency saves that I rescued to a new d...
-
I'm not too proud to grasp at straws... So, how do I do that?
-
Alas no, I have only 16TB drives (6x) and all bays are populated. I would have to buy an 18TB drive...
‎2024-10-04
09:18 AM
18 Kudos
Hello Meural Community, We are aware of the issue with the Meural server that is causing the Canvas I and Canvas II to appear offline on the Meural app and my.meural.com. Our Engineering team...
Show results in replies (9)
-
Hello Meural Community, I wanted to let you know that we have recently deployed a server...
-
Still down currently but seeing a few users on reddit saying they are back online. What's the so...
-
This issue has not been resolved.
-
Mine has been back online for a day or so now.
-
Hello @dustindolin , I'm sorry to hear you are still experiencing an issue wit...
-
My two MC227 canvases are still offline as of just now; I checked via my.meural.com.
-
My Meural is still not functioning, and while it states it is connected to my WiFi, I am unable to ...
-
I almost can’t believe it. Both of my MC227 canvases are back online after the pushed 2.09 update w...
-
Anyone who is still experiencing offline issues here, please try the following Power your...
‎2024-06-01
05:11 AM
Netgear RAX43 -100EU Firmware Version V1.0.16.132_2.0.92 The router manual states that Transmit Power Control setting on the Netgear Nighthawk RAX43 can be found as follows: ...
Show results in replies (9)
-
@michaelkenward wrote: @gcalli wrote: It's a pity that these routers can't be twe...
-
@michaelkenward wrote: For easier reading, and before the vandals arrive: Curious what ...
-
Thanks for your comprehensive reply. Lots of food for thought. Very valid last point! I wis...
-
@gcalli wrote: Greatly appreciate your guidance. Next time you want...
-
For easier reading, and before the vandals arrive:
-
Got it. Thanks. Definitely will do.
-
Might be off topic, but it still concerns the RAX43 Is there perhaps a setting for Wake on Lan in ...
-
@michaelkenward wrote {Out of interest, why is it so important to have control over the Transm...
-
The manual is outdated. Transmit power has been removed a long time ago and is now locked by region...
‎2024-08-26
01:28 PM
Slow upload speeds from rs700+cm3000 2gbit down / 300mb up service plan i am contracted for Comcast tech just left and did a meter-based speed test on the coax line. the coax line te...
Show results in replies (8)
-
I called into support he had me disable QOS and first try the thing ripped
-
If Comcast confirms it delivers more than 300mbps for the upload on the cable, the CM3000 + RS700 s...
-
@BH-C more testing completed, took tests from the router its self, as well s the laptop...
-
Yes I would agree the hardware should support it. 300 is not a huge ask when it's doing the 2k down...
-
Please post a copy and paste of the modems connection status and event log page. Full data from the...
-
Is bh-c netgear community support? Or should I open a support case somehow?
-
Ok, great comparison test. Ya, seems like something happening with the RS. I'd try another ...
-
pre removal of amp and addition of splitter to bring down power level Cable Diagnost...