Bandwidth monitoring by device

Question

Hello all!&nbsp;I was wondering if anyone has found out how to organize and/or prioritize bandwith by device for the ORBI system? I have found a way to enable QoS, but have not found a way to set the priority of which device(s) receive(s) the signal in a specific order. I'm having trouble keeping the wifi signal on my CPI camera connected.&nbsp;&nbsp;Any advice would be appreciated.&nbsp;Thanks!

st_shaw · Answer

Quality of Service router settings won't help your WiFi signal. &nbsp;Can you move one of the Orbi units closer to the camera, or move the camera closer to the Orbis?

Mestegall · Answer

I have relocated it already so that it is literally 10' from the orbi satellite device. It's basically as close as I can get it.&nbsp;

st_shaw · Answer

Are you sure the camera is connecting to the closest Orbi? &nbsp;You might need to reboot the camera to get it to connect to the strongest signal.

Mestegall · Answer

Thank you for your suggestion, however I've rebooted the camera multiple times to try to maintain the signal.

st_shaw · Answer

Distance isn't necessarily what matters--it's what's between the camera and Orbi. &nbsp;You haven't described that. If there's a stone wall, metal siding, cinderblock,&nbsp;etc. in between, it would block the signal. &nbsp;You might need to move the camera so it has clear line of sight to the Orbi, maybe through a window.&nbsp;If there's nothing between the Orbi and camera, then maybe there's an issue with the camera.

Forum Discussion

Bandwidth monitoring by device

8 Replies