NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Connect 2 Orbi RBR40 routers together
There was no choice for RBR 40 but we have 2 of them. Prior to me arriving at this home it looks like they were using them to gain internet access at the far end of the home. Can someone tell me how ...
Advanced Tab/Advanced Settings/Wireless Settings
The modem is XFinity XFSETUP-0D85
Is this model# or the wifi SSID?
Look on the sticker on the modem for Model# information. I'm not seeing this particular value listed as a model#
Just says XFSetup there is a Part Number or PN CGM4140COM
If that helps.
I went through the set up now trying to find optimal spot to place the Orbi extender node. After I unplug and take to next location to test do I need to press Sync or will it unpon restart look for the Master device?
I notice a white pulse color on the top then it sometimes turns blue-purple. What color is it when its connected and in idle mode? So far can’t get it to give me any boost. Thanks
What is the size of your home? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet is recommended in between them to begin with depending upon building materials.If you set up the RBS unit in the same room initially with the router, once it's setup there, all you need to do is to power it down, take it to the remote location and power it on. No need to re-sync it.
https://kb.netgear.com/31030/What-do-the-LEDs-on-my-Orbi-mean
The setup is as follows:
Main unit to first sattelite is 20 ft through a ceiling. 2nd sattelite is about 20 feet away through 2 plaster walls. The only other question I have is when I tun on the 2nd sattelite does it automatically look for the closest connection or do I need to sync it? Thanks seems to be working now.