I called customer services, they said the Netgear Orbi is only guaranteed to work with a maximum of 4 satelites. They said although the router allows you to add more, if you go beyond 4 you will experience various problems due to "bandwith". I asked them if an ethernet backhall would overcome these problems but they insited no. However I am doubtful as to reliability of this answer, the guy I spoke too seemed low IQ. Please can someone advise. My ideal scenario is 6 orbi units conected by ethernet backhall, and up to three units sprinkled around using the mesh. My home is large but the real problem is my extremely think flint walls which absorb signal. Even on a mesh instead of ethernet backhall, the Linksys Duo supports 9 units, the Velop 10+, Google Home 17, eero say they are unlimited. I can't understand how the Orbi could fail with more than four it would have to be doing something very different. So I think the guy I spoke to was talking nonsense but I need someone who really knows the system to give me a true answer. Thanks very much

just buy 2 more satellites and try. the range is so powerful they might not of ever tested it. you may also consider moving away from orbi and going to ubiquity unify. needing that many access points may require a higher level of equipment to really run properly.

I have the router plus two satellite pack plus I bought the outdoor satelite. All are connected via ethernet backhall. However due to the thickness of the walls I need many more. I am renovating parts of the property, in these areas its easy for me to add ethernet backhall. Other parts are not so easy- hence my decision to go for a mesh capable system instead of paying someone to do a site survey and install ubiquiti networks 2.4ghz long range access points which would obviously be the ideal solution for thick wall penetration.Does anyone know the answer to my question please. I don't want suggestions or complaints. I want to understand the three / four satelite limit on the netgear system which is the lowest limit on the market. How can there be such a low limit with an ethernet backhall? There is no explanation on the internet.

I should add that I was not aware of the limit when I bought the devices from netgear it is something I only just found out about as I was looking to expand and I have invested so much money in the system I don't want to start again.

you are on a internet forum asking about possible firmware limitions at the engineering level. No one here will have that answer. Thats why I suggested you just buy a few more satellites and try it. If it doesn't work, return it and get your money back and you will have answered the question if it will work. It will not answer the why, its just not possible to know without being the team to created the system. On the ubiquity side Im not referring to long range antennas, just a router and some poe access points. I bring it up because ive used google home wifi and linksys velop. google is great but low throughput. velop is just too unstable and basic setup will require you to call tech support.

My friend I told you I spoke to netgear sales. I would like to call customer support but there is no number and the app does not support my serial number and the web interface is not giving me a phone number. So I am stuck on this forum.It is not about firmware limitations, the guy from sales said on his first day he got a lecture on the product and they said although you can add as many satelites as you like in theory, it will grind to a halt due to insufficent "bandwidth" so you have to tell customers that only three satelites are supported. But I said to him if I use an ethernet backhall surely I will be OK. He said NO, but he could not explain and he was talking nonsense about various things and so the question remains open.Now I could just go and buy some more and try it but I have to decide quickly because my return window is closing in the next few days.Therefore I am hoping someone from netgear who knows thier technology does read this post. Or someone who has tried it for themselves. Eg there is a post on this forum by a guy with four satelites. But I could not see any by someone who has tried to go much further.

Going beyond 4 Satelites with ethernet backhall

12 Replies

waynealight
Apprentice
Jul 28, 2018
just buy 2 more satellites and try. the range is so powerful they might not of ever tested it.

you may also consider moving away from orbi and going to ubiquity unify. needing that many access points may require a higher level of equipment to really run properly.
- whoops
  Aspirant
  Jul 28, 2018
  I have the router plus two satellite pack plus I bought the outdoor satelite. All are connected via ethernet backhall. However due to the thickness of the walls I need many more. I am renovating parts of the property, in these areas its easy for me to add ethernet backhall. Other parts are not so easy- hence my decision to go for a mesh capable system instead of paying someone to do a site survey and install ubiquiti networks 2.4ghz long range access points which would obviously be the ideal solution for thick wall penetration.
  Does anyone know the answer to my question please. I don't want suggestions or complaints. I want to understand the three / four satelite limit on the netgear system which is the lowest limit on the market. How can there be such a low limit with an ethernet backhall? There is no explanation on the internet.
  - whoops
    Aspirant
    Jul 28, 2018
    I should add that I was not aware of the limit when I bought the devices from netgear it is something I only just found out about as I was looking to expand and I have invested so much money in the system I don't want to start again.
FURRYe38
Guru
Jul 29, 2018
Bandwidth will and can be a challenge as well as interferences and noise. If you have too many wifi signals in a close proximity, noise and congestion on wifi channels will become a problem and cause disconnets and wifi instability. You don't want too many wifi signal sources too close to each other. Wireless or wire connected satellites. Also the Orbi system seems to have a distance sweet spot in regards to how close the satelllites are to the base router. 30-40feet seems to be a good starting point for these systems when they are connected wirelessly. 4-6 satellites is good for a average home. If your using these for a business, then you not get what you desire as these are for a home setting. Maybe a small office. If you needing them for a Business, then you should looking into the Orbi Pro version or some other kind of wifi system meant and built for business.

Over all the Orbi is what it is and is designed for limited configurations. Anything beyond this could be problematic and not supported.

Good Luck
- budy
  Luminary
  Jul 30, 2018
  Ehh…? In what regard does this relate to the topic of wanting to install more than 4 satelites via wired backhaul?
  
  Cheers,
  
  budy

Forum Discussion

Going beyond 4 Satelites with ethernet backhall