NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

styvy's avatar
styvy
Follower
May 09, 2022

LBR20 lte port forwarding not working

hi everybody

 

i have configured port forwadins http: 8080   but not working on LTELBR20

 

do i need static IP or no  for LTE

if a test with other router with IPS modem cable  and open port 8080 is working

 do you knows why is notworking

 

best regard

 

1 Reply

  • KevinLiT's avatar
    KevinLiT
    NETGEAR Moderator
    May 09, 2022

    Hi styvy,

     

    I understand that you would like more information to successfully implement port forwarding on your LBR20. 

    I have included steps below on how to port forward with the LBR20: 

     

    • Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering. The Port Forwarding/Port Triggering page displays
    • Leave the Port Forwarding radio button selected as the service type.
    • Click the Add Custom Service button. The Ports - Custom Services page displays.
    • In the Service Name field, enter a descriptive name. 
    • In the Protocol menu, select the protocol. If you are unsure, select TCP/UDP. 
    • In the External Port range field, enter the port numbers. 
    • Specify the internal ports by one of these methods:
    • Leave the Use the same port range for the Internal port check box selected. 
    • Type the port numbers in the Internal port range field. 
    • Type the IP address in the Internal IP address fields or select the radio button for an attached device listed in the table. 
    • Click the Apply button. The service is now in the list on the Port Forwarding/Port Triggering page

     

    For more information on port forwarding please navigate to the link below (page 122):

    https://www.downloads.netgear.com/files/GDC/LBR20/Orbi_LBR20_UM_EN.pdf

     

    Best,

    Kevin

    Community Team