NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Orbi w/ AT&T Fiber
To start off, I am not familiar with or knowledgeable about networking/wi-fi set-up at all.
I am trying to set up an Orbi system I recently purchased (a RBR50 router and 2 RBS50 satellites) to ...
Modem Combo Units:
Couple of options,
1. Configure the modem for transparent bridge mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly. Might ask the ISP for help about IP Pass Through as well.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, LAN to LAN and configure AP mode on the Orbi router. Use the modem as your main host router.