NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RBR50 and 2 RBR50S and one wall satellite - STOPPED WORKING
I have had my RBR50 (latest firmware is 2.2.1.210) since 11/2016. I can't get Netgear to support it (surprise). I came home tonight and all my satellites are magically sharing the same ip address ...
4 hours later, I changed all my satellites to static via these directions:
https://community.netgear.com/t5/Orbi/IP-address-for-Satellite/m-p/1289664#M7357
4 hours later, I changed all my satellites to static via these directions:
https://community.netgear.com/t5/Orbi/IP-address-for-Satellite/m-p/1289664#M7357
It is not clear if your issue continues after firmware upgrade: Please let us know.
- Yes, the issue still persisted after the firmware upgrades. I had to assign my Satellites separate static IPs. I used .25 .26 .27. That solved my problem.
Good deal.... from what I have seen, it is pretty much a standard practice for orbi owners to reserve IPs for their satellites.
- I’ve had mine for 2 years and never had I done this or been told this. I have Orbi at my lake home as well and i have not had to do it there yet. I’m curious as to what has happened to cause this necessity now?